Loading and Removing the Memory Card....……………... …….29
1
Setting Up the OSD Language………............... …….........…30
5-4
Setting Up the Date/Time……………………………………......….…..30
5-5
5-6 PC Mode…………………….………................………………………………30
Chapter 6 Driver Installation
Installing the Camera Driver for PC……………….………...………..32
6-1
Chapter 7 Application Installation
Installing the Application for PC ............. ……..................34
7-1
Appendix: PicBridge error types
2
1. Attention
Please read through this manual carefully before using the camera and follow
the instructions to avoid damages caused by improper operation.
1-1 Safety Precautions
●The software CD-ROM packaged with the camera is designed for PC only.
Using a stereo or CD player may damage the CD-ROM.
●This camera is a precision electronic device. Do not attempt to service this
camera yourself, as opening or removing covers may expose you to
dangerous voltage points or other risks.
●Do not expose this camera under direct sunlight to avoid causing a fire.
1-2 Before Using Your Camera
●Take some test shots before you perform the formal recording.
Before taking pictures with this camera in any important occasion (such as
a wedding ceremony or an overseas trip), do test the camera beforehand to
ensure that it functions well. Any additional loss caused by the malfunction
of this product (such as costs of photography or any loss of benefit
generated by the photography) is not the responsibility of our company and
no compensation will be given for it.
●Copyright information
Unless agreed by the right owner, all the pictures taken with this digital
camera cannot be used in violation of copyright law. Moreover, when "No
Photography" restriction is placed on site, one cannot record any live
performance, improvisation or exhibits even for personal purpose. Any
transfer of pictures or memory card with data must be conducted under the
constraints of copyright law.
●Notes on the LCD (Liquid Crystal Display) monitor
Please be extra careful with the liquid if the L CD monit or is damag ed; also
please abide the stated procedures, if the followings occur:
1. If the liquid makes contacts with the skin:
Please wipe the skin dry with a cloth and wash thoroughly with water.
2. If the liquid gets in the eye:
Please rinse with water immediately f or at least 15 minutes and then
consult a physician to receive treatment as soon as possible.
3. If the liquid is accidentally swallowed:
Please rinse the mouth with water, drink large amount of water and
induce vomiting. And then consult a physician to receive treatment as
soon as possible.
1-3 Operation Caution
This product consists of intricat e elec t rical pa rts. To ensure the performance
normality, do not drop or hit the camera when taking pictures.
●Avoid using or placing the camera in the following locations:
1. Damp and dusty places.
2. Sealed vehicles, direct sunlight exposure areas, or places with extreme
high temperatures or heat.
3. Violent turbulent environment.
4. Locations full of smoke, oil fumes or steams.
3
5. Locations subject to strong magnetic field.
6. Rainy or snowy environment.
●Do not open the battery cover when the power is on.
●If water has gotten into the camera, turn the power OFF and remove the
batteries immediately.
●How to maintain your camera:
1. If the lens, LCD monitor or viewfinder surface i s dirt y, please use lens
brush or soft cloth to wipe clean instead of touching the lens with you
fingers.
2. T o avoid scrat ching the lens, LCD mon itor or viewfinder surfac e, do not
use any solid object to hit the camera.
3. Do not use any detergent or volatile solution, which will subject the
camera case and the paint to solving or distortion. Use soft cloth only.
1-4 Package Contents
Please check if the following items are in the package when purchasing this
product.
(1) Macro LED
(2) Status LED
(3) Play back Button
(4) Mode Button
(5) Set Button
(6) Function Key
(7) Macro Button
(8) USB/AV Port
(9) LCD Monitor
6
2-2 Specifications
● Lens: f=8.341mm
● Image Sensor: 1/2" CMOS with 3.0 mega pixels
● TFT LCD: 2”
● Focus: F / 3.0
● Sensitivity: ISO 100
● White Balance: Auto, Sunny, Tungsten, Fluorescent.
● Shutter: Electrical
● Shutter Speed: 1/4 sec. ~ 1/2000 sec.
● Storage Medium: 16MB Internal Flash Memory
● Image File Format: Still Image for JPEG
● Image Resolution: Fine: 3264 x 2448 (Firmware In terpolation T echnology)
2592 x 1944 (Firmware Interpolation Technology)
2048 x 1536
1280 x 960
● Digital Zoom: 1X-4X Digital Zoom
● Focal Range – Standard: 120c m ~ Infinity
● Focal Range – Macro: 17cm ~ 22cm
● Self-timer: 10 sec. delay
● PC-CAM Mode: QVGA (320 x 240) 30 fps
● Flash Mode: Auto, Off
● PC Interface: USB (Ver. 1.1)
● AV OUT: USB/AV Cable
● Movie File: QVGA (320 x 240) format an d VGA (640 x 480) format .(16MB
● Recordable Image Numbers (16MB):
1280x960 2048x1536 2592x1944 3264x2448
16MB
SD Card Slot (support 8MB~512MB)
Motion Image for JPEG
VGA (640 x 480) 30 fps
internal memory)
Resolution Image quality times
Video
640*480
320*240
Fine 20s
Normal 39s
Fine 38s
Normal 70s
Fine 52 20 13 9
Normal 116 45 29 18
7
● Power Supply: 2 x AAA Alkaline Batteries or supports
USB 5V (PC-CAM Mode)
● Dimensions:85 x 55 x27 mm
● Wei ght: About 117g (batteries excluded)
2-3 System Requirements
When operating the digital camera, we strongly recommend you to use a
better computer system for optimal performance. The minimal system
requirement for digital camera is as follows: (For Macintosh computers, only
removable disk is applicable)
OS Microsoft Windows 98SE/Me/2000/XP
CPU Intel Pentium 166MHz or higher
Memory 32 MB memory or above
CD-ROM 4X or above
HDD Minimum 10MB free disk space on the
Others One standard USB 1.1 or USB 2.0 port
System requirement (Macintosh Computer)
OS Mac OS 8.6~9.2, Mac OS X 10.1 or above
CPU PowerPC 601 processor or higher
Memory 64 MB memory or above
HDD Minimum 10MB free disk space on the hard
Others One standard USB 1.1 or USB 2.0 port and
System Requirement
hard drive
drive
CD-ROM
8
T
3. Controls, Operation, and Display
3-1 LED Indicators
The meanings of the LED indicators located on the top of the LCD monitor
are:
(Green LED) (Red LED)
Macro LED Standby/Busy
he green LED will be on when the
Macro (Left Green LED)
Busy (Right Red LED)
Macro key on the left hand side of
the camera is switched to Macro
mode.
The red LED will be on when the
camera is recording or when the
batteries for the flash lights are
charging.
3-2 LCD Monitor Display
(1) Current working mode
(2) Memory Status
(3) Number of pictures
(4) Remaining battery power
(5) Zoom lever
(6) Flash light status
9
3-3 Power Supply
To turn on the camera, press the power button.
●
●
To turn off the camera, press the power button.
● Press the power button on the top to turn on/off the camera. When the
power is on, the red indicator will be blinking and the LCD monitor turns
on.
※ This camera has power saving design. If no operation on camera for 60
seconds, the power is turned off to prevent battery wear. Please power on
camera again.
※ The following features will automatically save the configuration before the
camera is turned off unless the "R eset Default" has been selec ted to restore
its factory anticipated settings.
This camera is designed for 2-step shutter function. A "[ ]" mark will appear
●
in the center of the LCD monitor wh en the Shutter button is pressed and held
half way down. The camera will beep after the Shutter button is pressed
down fully; then release the Shutter button to take a picture.
3-5 Mode Selection
Please press and hold ”” button for 2 seconds to enter mode
●
selection menu including “Play Mode” “Setup Mode”
“Movie Mode” “Capture Mode" "Function Selection”
.
。
3-6 Function Key
You can perform different operations in the different mode by using the
●
Function Key, e.g. select, go up/down and move.
3-7”SET” Button
●
This key is used for SELECTION/SET UP under selection menu
This key is also flash button under capture mode.
11
Loading...
+ 27 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.