KOBE KDF300 Operator's Manual

OPERATOR’S MANUAL

KOBE

INDUSTRIAL POWER TOOLS

MODEL KDF300

ORDER CODE KBE-828-0030K

12” DESK FAN

© The Kennedy Group Ltd. 05/05

AVAILABLE FROM YOUR DISTRIBUTOR

Manufactured For

:

KENNEDY TOOLS

Wigston Works, Leicester, England.

ISO 9001 REGISTERED COMPANY

QUALITY GUARANTEE & WARRANTY

KOBE INDUSTRIAL POWER TOOLS carry one years manufacturers warranty.

KOBE INDUSTRIAL POWER TOOLS are designed & manufactured

to the highest standards & specifications

Assuring the quality and performance required by all sectors of industry.

KOBE INDUSTRIAL POWER TOOLS are fully guaranteed against

faulty materials & workmanship

Should they be found to be defective, they will either be repaired or replaced free of charge

(fair wear and tear and/or misuse excepted).

Please retain supplier invoice as proof of purchase.

E C ELECTROMAGNETIC

COMPATIBILITY DIRECTIVE

89/336/EEC

DECLARATION OF

CONFORMITY

We hereby certify that the

KOBE Desk Fan

Model KDF300

complies with all the relevant provisions of the

The Electromagnetic Compatibility Directive of the

Council of European Communities

Harmonised Standards Applied: EN 55014-1:2000

EN 55014-2:1997, EN 61000-3-2:2002, EN 61000-3-3:1995

Manufactured for

KENNEDY TOOLS

Wigston Works, Leicester, England.

ISO 9001 REGISTERED COMPANY

Signed:

Date: 1st May 2005

Name: Martin Cooke

Position: Director, The Kennedy Group Ltd.

E C LOW VOLTAGE

DIRECTIVE

73/23/EEC

DECLARATION OF

CONFORMITY

We hereby certify that the

KOBE Desk Fan

Model KDF300

complies with all the relevant provisions of the

The Low Voltage Directive of the

Council of European Communities

Harmonised Standards Applied: EN 60335-2-80:2003

EN 60335-1:2002

Manufactured for

KENNEDY TOOLS

Wigston Works, Leicester, England.

ISO 9001 REGISTERED COMPANY

Signed:

Date: 1st May 2005

Name: Martin Cooke

Position: Director, The Kennedy Group Ltd.

2005 2005

Read all of this manual before using your desk fan and retain for future reference.

Adjustable Head Tilt

90°Oscillating Control

3 Speeds

Silent Running

Blade diameter: 300mm
(12”)

45W Power

Fitted with plug in
accordance with BS3456

KOBE

INDUSTRIAL

POWER TOOLS

SAFETY INSTRUCTIONS

KOBE

INDUSTRIAL

POWER TOOLS

SAFETY INSTRUCTIONS

You have purchased a quality industrial product that is

designed for high performance and long service life.

If correct use, safety and maintenance procedures

are observed this product will last for many years.

Thank you for choosing our KOBE Electric Fan. Your new fan has been designed using the latest

technology. With normal maintenance, your Electric Fan will provide years of satisfactory performance.

Please read this Owner's Manual carefully before using this fan and save it for future reference.

 Be sure your fan is in the OFF position.
 Unplug the fan from the electricity supply.
 Loosen the grill ring and remove the front grill.
 Unscrew the blade clamp by turning it CLOCKWISE

(REVERSE THREAD).

 Pull the fan blade away from the motor housing.
 Gently wipe the fan blade and grills with a damp

cloth.

 DO NOT immerse the fan in water and never allow

water to enter the motor housing.

 DO NOT use gasoline, paint thinner or other

chemicals to clean the fan.

 For storage, disassemble and clean the fan carefully

as instructed and store in its original box. You may
leave the fan assembled and covered to protect it
from dust. Store the fan in a cool dry place.

CAUTION: To avoid the risk of injury, always make sure that the front and rear
grill are locked together before operating.

When using electrical appliances, basic precautions
should always be followed to reduce the risk of fire,
electric shock and injury to persons, including the
following:

 Always use this fan only as described in this

manual. Other uses not recommended may
cause fire, electric shock or injury to persons.

 Always supervise as necessary when any

appliance is used by or near children.

 Always avoid contact with moving fan parts.

 Always turn the fan to the OFF position and

unplug the fan from the outlet when not in use
and before cleaning.

 Always place the fan on a dry level surface.

 Always check that the filters are clear and not

blocked. Keep all openings clear of any
blockages.

 Do not use this product outdoors.

 Do not pull by the cord. To disconnect the fan,

first turn control to the OFF position, grip the
plug and pull it from the wall outlet.

 Do not operate the fan in the presence of

explosive and/or flammable fumes.

 Do not place the fan or any parts near an open

flame, cooking or other heating appliance.

 Do not operate the fan with a damaged cord or plug

or if the product malfunctions, is dropped or
damaged in any manner.

 Do not hang or mount fan on a wall or ceiling.

 Do not operate if the fan housing is removed or

damaged.

 Do not operate the fan without checking that the

protective front and rear grill are position.

 To protect against electric shock, do not

immerse unit, plug or cord in water or spray with
liquids.

 Do not connect this fan to any power source

other than properly grounded ones. DO NOT
attempt to defeat this safety feature. This fan
requires a grounded power source.

 The use of attachments is not recommended

and may be hazardous.

 A loose fit between the AC outlet (receptacle)

and plug may cause overheating and a distortion
of the plug. Contact a qualified electrician to
replace loose or worn outlet.

 If the power cord is damaged, it must be

replaced by the qualified electrician or
professional technician in order to avoid a
hazard.

 Be sure your fan is in the off position.

 Place the fan on a dry and level surface and plug

the cord into a grounded AC 240V 50HZ wall
outlet, which should meet conditions in the
safety instruction.

 Tilt the fan grill slightly to desired angle.

 Loosening and tightening adjustment: loosen the

tightening screw on the neck of manual control

panel, tilt the fan grill slightly to desired angle,
and then tighten the screw firmly.

 Air flow setting: 0=Off, 1=low, 2=Medium,

3=High.

 Oscillation: to activate or disengage the

oscillating feature, push down or pull up on the
oscillation button on the fan head.

1 Front Grill
2 Grill Ring
3 Blade clamp
4 Fan Blade
5 Mounting Nut
6 Rear Grill
7 Motor Housing
8 Oscillation button

9 Speed Switch
10 Base Cover
11 Base
12 Power Cord

Item Components

GENERAL SAFETY

ASSEMBLY

CLEANING AND STORAGE

OPERATION

SPECIFICATIONS

PLEASE ASSEMBLE FAN ACCORDING TO
ILLUSTRATION DIAGRAM

 Step 1.

Remove the rear grill mounting nut. Place the rear grill
onto the motor housing by making sure the two holes
of rear grill fit over the two bumps on the motor
housing. Tighten the rear grill mounting nut
CLOCKWISE.

 Step 2.

Assembly of the grill:

Push the fan blade onto the motor shaft and make
sure the screw on the blade is lined up the concave on
motor shaft. Tighten the screw. Be sure the blade can
not be pulled out from the shaft.

 Step 3.

Raise the build-in clips around the front grill. Properly
align the front grill over the rear grill and fasten the
clips onto rear grill.

 Step 4.

Hold the front grill of the fan, and using a phillips-head
screwdriver loosen the screw slightly on the bottom of
the grill ring, just enough to relieve the tension. Angle
the front grill and the grill ring over the rear grill and
snap into place. Tighten the screw on the
grill ring.

Order Code KBE-828-0030K Model No. KDF300

Power 45W (Max) Weight 2.8Kg

Blade Diameter 300mm (12”) Speed 3

Voltage AC 240V 50Hz Oscillating Control 90

°

Head Tilt Adjustable

Fitted with plug in accordance with BS3456

1

2

3

4

5

6

7

8

9

10

11

12