DECLARATION OF CONFORMITY
We hereby certify that the Kobe Model DMM3550 Magnetic Drilling & Milling Machines
complies with all the relevant provisions of the following directives:
LOW VOLTAGE DIRECTIVE 2006/95/EC
MACHINERY DIRECTIVE EN 792, 2006/42/EC
RoHS DIRECTIVE 2002/95/EC
ELECTROMAGNETIC COMPATIBILITY DIRECTIVE 2004/108/EC
Official Agent
KENNEDY TOOLS
P.O.Box 14, Wigston Works, Leicester, England.
OPER ATOR’S MANUAL
MAGNETIC DRILLING & MILLING MACHINES
Kobe and the Rising Sun logo are trade marks of Kobe Power Tools.
© The Kennedy Group Ltd. 10/11
QUALITY GUARANTEE & WARRANTY
KOBE POWER TOOLS carry one years manufacturers warranty.
KOBE POWER TOOLS are designed & produced
to the highest standards & specifications
KOBE POWER TOOLS are fully guaranteed against
faulty materials & workmanship
Should they be found to be defective, they will either be repaired or replaced
free of charge (fair wear and tear and/or misuse excepted).
This does not affect your legal rights.
Please retain supplier invoice as proof of purchase.
AVAILABLE FROM YOUR DISTRIBUTOR
Please retain this information for future reference.
Suitable for light industrial use.
Power ful 1200W motor provides
enough power to drill holes up to
35mm diameter.
Speed: 595rpm.
Gravity feed coolant
13mm Chuck and Weldon
adpadtor.
Kobe Tools continually strives to improve its products, specifications may change without prior notice.
WARNING:
THE SAFETY INFORMATION
GIVEN INSIDE MUST BE READ AND
UNDERSTOOD BY ANY PERSON
USING, INSTALLING, REPAIRING
OR MAINTAINING THIS MACHINE.
ALWAYS WEAR
APPROPRIATE
PERSONAL
PROTECTIVE
EQUIPMENT.
KOBE TOOLS Official Agents:
JAPAN: MIKI TOOL TRADING CO. MIKI CITY, JAPAN.
EUROPE, MIDDLE EAST, AMERICA & AFRICA: KENNEDY TOOLS, WIGSTON, ENGLAND.
Supplied by an ISO9001 approved company
MODEL DMM3050
ORDER CODE
KBE-268-4220K (240v)
KBE-268-4220K_Instructions.qxd 29/09/2011 12:36 Page 1
KOBE
INDUSTRIAL
POWER TOOLS
ITEMS FROM THE KOBE RANGE
..... and
many more!
2 11
KOBE INDUSTRIAL POWER TOOLS
have been specifically designed to help you work
SAFELY and EFFICIENTLY. Your care and good judgement are the best protection against injury, but
always ensure that the appropriate safety equipment is worn. All possible hazards cannot be covered here,
but the most important ones have been highlighted.
KOBE
INDUSTRIAL
POWER TOOLS
SAFETY INSTRUCTIONS
You have purchased a quality professional product that is
designed for high performance and long service life.
If correct use, safety and maintenance procedures
are observed this machine will last for many years.
Always adhere to the processes and safety
warnings, which are stated in the instruction
manual.
MOVING & MANUAL HANDLING
This Mag. Drill weighs 13.5Kg and must be
handled with care especially when working at
height.
GENERAL OPERATING HAZARDS
Always ensure the mains power supply
corresponds to the power rating on the
specification label on the machine.
Always plug the pillar drill into an appropriate
outlet that is properly installed and grounded in
accordance with all local codes and ordinances.
Check with a qualified electrician if you are in
doubt as to whether the outlet is properly
grounded.
Always disconnect from the electrical power
supply and ensure that the chuck has stopped
rotating before cleaning or carrying out user
maintenance.
Always ensure the maintenance of electrical
components is carried out by a suitably qualified
person.
Never allow routine to lead to mistakes.
Never operate if any parts are missing or
damaged.
Never allow untrained persons to operate the
pillar drill.
Never touch the metal plug pins when connecting
or removing the electrical plug.
WORKPLACE HAZARDS
Always keep the electric cable away from heat
and sharp edges.
Always keep children or pets away from the pillar
drill, electric cable or the work area.
Always use a RCD (Residual Current Device) to
provide protection against electric shock.
Always ensure all users are physically able and
competent to handle the size and weight of
items/components being drilled and have
received appropriate training to perform the task.
Never run the pillar drill in areas exposed to
water or in damp conditions.
Never direct jets of water or flammable liquids
over the pillar drill.
SYMBOLS USED ON THE MAGNETIC DRILL
Warning
Read the operator’s
manual
Always wear the appropriate
personal protection
KBE-268-4220K_Instructions.qxd 29/09/2011 12:36 Page 2
Loading...