Kobastar K1, XK3118T1 User Manual
1
KOBASTAR K1 USER MANUAL
2
TABLE OF CONTENT
1.0 BRIEF INTRODUCTION………………..…………………………………………..………………...……………………………….3
1.1 TECHNICAL PARAMETERS……………….………………….….…………………………………3
2.0 INSTALLATION………….…….………………………………………………………….…………….………..………………………3
2.1 INDICATOR INTERFACE………….………………..…………………………………………..……3
2.1.1 K1 BACKSIDE……..…..…………………………………………………………..…………3
2.1.2 Loadcell with connection…..……..………………….…………………………….…4
2.1.3 Serial Communication Wire Connection..…….………………………………..4
3.0 OPERATION………………..…………………………………………………………………………………………………………….4
3.1 AUTO ZERO WHEN TURN ON AND OFF…………………………………………………………4
3.2 MANUALLY ZERO...……………………………………………………………………………………….4
3.3 TARE………….………………………………………………………………………………………………….5
3.4 OPERATION FOR TOTAL DISPLAY AND FUNCTION……………………....……………..…5
5.0 CALIBRATION.……………………………………..……………………………………………………………………………………6
6.0 OTHER PARAMETER SETTING AND FUNCTION……………..……….…………………..……………………………..6
7.0 ERROR WARNING.…………………………………………………………………………………………………………………….9
3
1.0 BRIEF INTRODUCTION
Weighing Indicator XK3118T1 adopts high anti-jamming Single-chip microprocessor and high
precision A/D conversion technology. It is with stainless steel frame (XK3118T1B is with plastic frame)
and widely applied in electronic pplatform scale, electronic floor scale and other static weighing
systems that equipped with 1-6pcs load cells. AC/DC are both available fort his indicator.
1.1 TECHNICAL PARAMETERS
Accuracy class: III, n=3000
A/D conversion method 20bit
Input sensitivity > 1.5uV/e
Load cell excitation: DC 5V, connect with 1-6 pcs loadcells with 350 ohm each
Loadcell connection mode: 6 wire (long wire auto compensation)
Division: 1/2/5/10/20/50 optional
Display: 6 bits LED, 10 indicating signs;
Specialized adapter power supply: AC 110-220V, 50Hz-60Hz(special adapter)
6V/4AH built-in maintaince free Lead-Acid battery
Working temperature 0-+40 °C , Humidity=85%(RH)
Storage temperature: -20~+60°C, Humidity=95%(RH)
2.0 INSTALLATION
2.1 INDICATOR INTERFACE
2.2 K1 BACK SIDE
Loading...