Kobalt KST 120X-06 User Manual
ITEM #0651246
40 V STRING TRIMMER
MODEL #KST 120X-06
KOBALT® and the K Design® are registered
trademarks of LF, LLC. All Rights Reserved.
ATTACH YOUR RECEIPT HERE
Serial Number Purchase Date
Questions, problems, missing parts? Before returning to your retailer, call our customer
service department at 1-888-3KOBALT (1-888-356-2258), 8 a.m. - 8 p.m., EST,
Monday - Friday.
AB141019
Français p. 20
Español p. 39
kobalttools.com
1
TABLE OF CONTENTS
2
Package Contents.................................................................................................................
Hardware Contents...............................................................................................................
Symbols.................................................................................................................................
Safety Information.................................................................................................................
Preparation ...........................................................................................................................
Assembly Instructions ..........................................................................................................
Operating Instructions ..........................................................................................................
Care and Maintenance .........................................................................................................
Troubleshooting.....................................................................................................................
Warranty................................................................................................................................
Replacement Parts List ........................................................................................................
3
4
5
7
9
10
14
16
17
18
19
PRODUCT SPECIFICATIONS
SPECIFICATIONS
Type
Speed
Cutting Path
Line diameter
Cutting capacity
Cordless, battery-powered
8,000 RPM
12 in. (300 mm)
0.065 in. (1.65 mm)
Dual line
Weight without battery 7.1 lbs.
kobalttools.com
2
PACKAGE CONTENTS
C
D
E
B
J
F
L
K
G
H
PART DESCRIPTION QUANTITY
B Trigger switch 1
C Palm lock button 1
D Safety lock button 1
E Front/Auxiliary handle 1
F Coupler 1
G Edge guard 1
H Guard 1
J Upper tube 1
K Lower tube 1
N
M
O
PART DESCRIPTION QUANTITY
L Spool cover
1
(preassembled to Spool
housing)
M Spool
1
(preassembled to Spool
housing)
N Opening
1
(preassembled to Spool
housing)
O Spool housing
1
(preassembled to Spool
housing)
kobalttools.com
3
HARDWARE CONTENTS (not shown actual size)
AA BB CC
Fastening knob
Qty. 1
Screw
(preassembled
to the Guard (H))
Qty. 2
Fastening clamp
Qty. 1
kobalttools.com
4
SYMBOLS
Some of the following symbols may be used on this product. Please study them and learn their meaning.
Proper interpretation of these symbols will allow you to operate the product better and safer.
SYMBOLS DESIGNATION EXPLANATION
V Volts Voltage
A Amperes Current
Hz Hertz Frequency (cycles per second)
W Watts Power
min Minutes Time
Alternating Current Type of current
Direct Current Type or a characteristic of current
Class II Construction Double-insulated construction
n
o
No Load Speed Rational speed, at no load
/min Per Minute
Wet Conditions Alert
Read the Operator’s Manual
Eye Protection
Safety Alert Precautions that involve your safety.
Long Hair
Loose Clothing
Revolutions, strokes, surface speed,
orbits, etc., per minute.
Do not expose to rain or use in damp
locations.
To reduce the risk of injury, user must
read and understand operator’s manual
before using this product.
Wear eye protection with side shields
that are marked to comply with ANSI
Z87.1 when operating this equipment.
Failure to keep long hair away from the
air inlet could result in personal injury.
Failure to keep loose clothing from
being drawn into air intake could result
in personal injury.
Keep Bystanders Away Keep all bystanders at least 50 ft. away.
kobalttools.com
5
SYMBOLS
Save these Instructions
The following signal words and meanings are intended to explain the levels of risk associated with this product.
SYMBOL SIGNAL MEANING
DANGER
WARNING
CAUTION
CAUTION
Indicates an imminently hazardous situation, which, if not avoided, will
result in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, could
result in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, may result
in minor or moderate injury.
(Without Safety Alert Symbol) Indicates a situation that may result in
property damage.
WARNING
• To avoid serious personal injury, do not attempt to use this product until you have read this
Owner’s Manual thoroughly and understand it completely. If you do not understand the warnings and
instructions in this Owner’s Manual, do not use this product. Call 1-888-356-2258 for assistance.
The operation of any power tool can result in foreign objects being thrown into your eyes,
which can result in severe eye damage. Before beginning power tool operation, always wear
safety goggles or safety glasses with side shields and, when needed, a full face shield. We
recommend a wide vision safety mask for use over eyeglasses or standard safety glasses
with side shields. Always use eye protection which is marked to comply with ANSI Z87.1.
kobalttools.com
6
Loading...