Kobalt KHT 240-06 User Manual
ITEM #0651247
40 V HEDGE TRIMMER
MODEL #KHT 240-06
ATTACH YOUR RECEIPT HERE
Serial Number Purchase Date
Questions, problems, missing parts? Before returning to your retailer, call our customer
service department at 1-888-3KOBALT (1-888-356-2258), 8 a.m. - 8 p.m., EST,
Monday - Friday.
AB141020
Français p. 17
Español p. 33
kobalttools.com
1
TABLE OF CONTENTS
........ 2
Package Contents .................................................................................................................... 3
Safety Information .................................................................................................................... 6
Preparation ............................................................................................................................. 10
Know Your Hedge Trimmer ..................................................................................................... 10
Operating Instructions ............................................................................................................. 11
Care and Maintenance............................................................................................................. 13
Troubleshooting ..................................................................................................................... 14
Warranty .................................................................................................................................. 15
Replacement Parts List ........................................................................................................... 16
PRODUCT SPECIFICATIONS
COMPONENTS
Type
Blade length
Cutting capacity
Reciprocating speed
Weight (without battery)
SPECIFICATIONS
Cordless, battery-operated
24 in.
3/4 in.
2,800 SPM
5.49 lbs.
kobalttools.com
2
PACKAGE CONTENTS
A
B
PART DESCRIPTION QUANTITY
A Hedge Trimmer 1
B Scabbard 1
kobalttools.com
3
SYMBOLS
Some of the following symbols may be used on this product. Please study them and learn their
meaning. Proper interpretation of these symbols will allow you to operate the product better
and safer.
SYMBOL DESIGNATION EXPLANATION
V Volts Voltage
A Amperes Current
Hz Hertz Frequency (cycles per second)
W Watt Power
SPM Strokes per minute
Alternating Current Type of current
Direct Current Type or a characteristic of current
Wet Conditions Alert Do not expose to rain or use in damp locations
Read the Operator’s
Manual
Safety Alert Precautions that involve your safety.
Keep Bystanders
Away
Eye Protection
Ricochet
Sharp Blade
The number of back-and-forth strokes the blade makes
per minute
To reduce the risk of injury, user must read and
understand operator’s manual before using this product.
Keep all bystanders at least 50 ft. away.
Always wear safety goggles or safety glasses with
side shields and, as necessary, a full face shield when
operating this product.
Thrown objects can ricochet and result in personal injury
or property damage.
Do not install or use any type of blade on a product
displaying this symbol.
kobalttools.com
4
SYMBOLS
Save these Instructions
The following signal words and meanings are intended to explain the levels of risk associated with
this product.
SYMBOL SIGNAL MEANING
DANGER
WARNING
CAUTION
CAUTION
Indicates an imminently hazardous situation, which, if not avoided, will
result in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, could
result in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, may
result in minor or moderate injury.
(Without Safety Alert Symbol) Indicates a situation that may result in
property damage.
WARNING
• To avoid serious personal injury, do not attempt to use this product until you have read this
Owner’s Manual thoroughly and understand it completely. If you do not understand the warnings and
instructions in this Owner’s Manual, do not use this product. Call 1-888-356-2258 for assistance.
The operation of any power tool can result in foreign objects being thrown into your eyes,
which can result in severe eye damage. Before beginning power tool operation, always wear
safety goggles or safety glasses with side shields and, when needed, a full face shield. We
recommend a wide vision safety mask for use over eyeglasses or standard safety glasses
with side shields. Always use eye protection which is marked to comply with ANSI Z87.1.
kobalttools.com
5
Loading...