Kobalt SGY-AIR214, 498363 User Manual
1
ITEM #0498363
MODEL #SGY-AIR214
Français p. 16
Español p. 31
ATTACH YOUR RECEIPT HERE
Serial Number Purchase Date
Questions, problems, missing parts? Before returning to your retailer, call our
customer service department at 1-888-3KOBALT, 8:00 a.m.-8:00 p.m., EST,
Monday-Friday.
AB1404
KOBALT
®
and the K Design®are registered
trademarks of LF, LLC. All Rights Reserved.
1/4 IN.
RATCHET WRENCH
2
Safety Information ............................................................................................ 3
Care and Maintenance ..................................................................................... 13
13Troubleshooting .................................................................................................
Warranty ........................................................................................................... .14
Exploded View...................................................................................................15
IMPORTANT: To operate correctly, this tool requires airflow that is at least 5.1 cubic feet per
minute (CFM) at 90 pounds per square inch (PSI). Actual air consumption may be greater during
periods of continuous use. Check the specifications of your air compressor
to be sure that it can
support your CFM and PSI requirements. An air hose may cause up to 15 PSI drop in pressure,
so you may need to set the output higher to maintain the required pressure at the tool.
5.1
CFM90PSI
Tool Requirements
Exigences relatives aux outils
Requisitos de herramientas
@
TABLE OF CONTENTS
Assembly Instructions ...................................................................................... 10
Preparation ....................................................................................................... 9
Package Contents ...........................................................................................
9
Product Specifications ......................................................................................
3
Operating Instructions .......................................................................................
11
3
SAFETY INFORMATION
PRODUCT SPECIFICATIONS
SPECIFICATIONS
COMPONENT
FREE SPEED 250 RPM
MAXIMUM TORQUE 30 ft-lbs
WORKING PRESSURE 90 PSI
AVERAGEAIR CONSUMPTION 5.1 CFM
AIR INLET 1/4 in. NPT
RECOMMENDED AIR HOSE 3/8 in. (inside diameter)
Please read and understand this entire manual before attemptingto assemble, operate or install the
product. If you have any questions regarding the product, please call customer service at
1-888-3KOBALT, 8:00 a.m.-8:00 p.m., EST, Monday-Friday.
Improper operation or maintenance of this product could result in serious injury and property
damage. Read and understand all warnings and operation instructions before using this equipment.
When using air tools, basic safety precautions should always be followed to reduce the risk of
personal injury.
WARNING
WARNING
YOUR RISK FROM THESE EXPOSURES VARIES, DEPENDING ON HOW OFTEN YOU DO
THIS TYPE OF WORK. TO REDUCE YOUR EXPOSURE TO THESE
CHEMICALS WORK IN A
WELL VENTILATED AREA, AND WORK WITH APPROVED
SAFETY EQUIPMENT, SUCH AS
A RESPIRATOR OR DUST MASKS WHICH ARE SPECIALLY DESIGNED TO FILTER
MICROSOPIC PARTICLES.
LEAD FROM LEAD BASED PAINTS
CRYSTALLINE SILICA FROM BRICKS, CEMENT AND OTHER MASONRY PRODUCTS
ARSENIC AND CHROMIUM FROM CHEMICALLY TREATED LUMBER
SOME DUST CREATED BY PAINT SPRAYING, POWER SANDING, SAWING, GRINDING,
DRILLING, AND OTHER RELATED ACTIVITIES IS KNOWN TO THE STATE OF CALIFORNIA
TO CAUSE CANCER, BIRTH DEFECTS, AND OTHER REPRODUCTIVE HARM. A LISTING OF
CHEMICALS CAN BE OBTAINED FROM www.oehha.ca.gov UNDER PROPOSITION 65. SOME
EXAMPLES OF THESE CHEMICALS ARE:
SQUARE DRIVE 1/4 in
4
SAFETY INFORMATION
RISK OF EYE OR HEAD INJURY
WHAT COULD HAPPEN HOW TO PREVENT IT
This particular air powered tool can be
capable of propelling materials such as
fasteners, metal chips, sawdust, and other
debris at high speed which could result in
serious injury.
WARNING
Compressed air can be hazardous and propel
objects and other particles that can cause
injury to soft tissue areas of the body, such as
eyes and ears. Particles or objects propelled
by the stream can cause injury.
Tools attachments can become loose or break
and fly apart propelling articles at the operator
and others in the work area.
For additional protection, use an
approved face shield in addition to
safety glasses.
Make sure that any attachments are securely
fastened and properly assembled before use.
Always use the tool at a safe distance from
others in the work area and ensure the work
area is safe at all times.
Always wear ANSI approved Z87.1 safety
glasses with side shields.
Never leave operating tool unattended.
Disconnect air hose when tool is not in use,
and place in a safe area.
WHAT COULD HAPPEN HOW TO PREVENT IT
WARNING
A ratchet wrench is capable of generating
sparks which can result in ignition of flammable
materials.
RISK OF FIRE OR EXPLOSION
Never operate tools near flammable
substances such as gasoline, naphtha,
cleaning solvents, etc.
Work in a clean, well ventilated area free of
combustible materials.
Never use oxygen, carbon dioxide or other
bottled gasses as a power source for air tools.
WHAT COULD HAPPEN HOW TO PREVENT IT
RISK OF LOSS OF HEARING
Always wear ANSI S3.19 hearing protection.Exposure to noise produced from the
operation of air tools can lead to permanent
hearing loss.
WARNING
5
SAFETY INFORMATION
WHAT COULD HAPPEN HOW TO PREVENT IT
WARNING
RISK OF ENTANGLEMENT
Tools which contain moving elements or drive
other moving parts, such as impact sockets,
can become entangled in hair, clothing,
jewelry and other loose objects, resulting in
severe injury.
Do not wear loose clothing, jewelry, or anything
that may get caught or tangled when using tool.
Remove any jewelry which may be caught by
the tool.
Always keep hands and body parts away from
moving parts.
Always wear proper fitted clothing and other
properly fitted safety equipment when using
this tool.
WHAT COULD HAPPEN HOW TO PREVENT IT
RISK OF CUT OR BURNS
Keep the working part of the tool away from
hands and body.
A ratchet wrench is capable of causing serious
injury if operated in an improper way, or used
in a manner which is not intended for the tool.
WHAT COULD HAPPEN HOW TO PREVENT IT
WARNING
RISK OF ELECTRIC SHOCK
Air tool accessories such as impact sockets
that come into contact with hidden electrical
wiring could cause electrocution or death.
Thoroughly investigate the work piece/area
for possible hidden wiring before performing
work.
Using air tools to attached electrical wiring can
result in electrical shock, electrocution,
or death.
This tool is not provided with an insulated
gripping surface. Contact with a “live” wire will
also make exposed metal parts of the tool “live”
and can result in electrical shock, electrocution
or death.
Never use tools attached to electrical
wiring while energized.
Avoid body contact with grounded surfaces
such as pipes, radiators, refrigerators, and
ranges. There is an increased risk of
electrical shock if your body is grounded.
WARNING
Loading...