KOB 8160-1, FS 300, FS-1, FS-2 Spec Sheet

Spec Sheet

Fuel Conveyance System
Fuel Replenishment System

Köb Holzheizsysteme GmbH, Flotzbachstr. 33, A-6922 Wolfurt, Tel. [phone], Fax 65707, E-Mail: [e-mail]

Subject to technical changes

8160-1

2009-03-01_GB

Silo Feed Auger FS 300 per m [Art. No. FS-L / 7387808]

Function:
A conveyor auger with an open design for filling fuel storage units situated inside a building from a heap situated outside.
At least two silo feed augers are usually necessary to do this. The silo feed augers are passed through the fuel storage
unit in a manner that achieves the largest possible degree of filling.

Scope of delivery:

- Silo feed auger as per ordering data

- Brackets for wall mounting

- Shaft for wall opening

Note: Auger length with drive unit of max. 10 m
Note on pricing: price specified per m: total length = interior of wall to the end of the auger in the drop-off zone (silo lid)
Only for Pyrot and Pyrtec. For Pyromat-DYN a special design is required.

Drive for silo feed auger ECO [Art. No. FS-1 / 7388012]
Drive for silo feed auger PYR [Art. No. FS-2 / 7387898]

Function:
The drive is situated inside the building outside the fuel storage unit, thus producing a pulling effect by the silo feed
auger.
For safety reasons, the key-operated pushbutton has to be placed near the heap. This is done in a manner such that the
operator has to continuously observe the filling process from the outside. Releasing the button immediately stops the
augers.

Scope of delivery:

- Drive unit for the silo feed auger

- Spur wheel back-geared motor geared to torque and conveying capacity, 3 x 400V

- Triggering system for the auger drive appropriate for the boiler control system

- Key-operated pushbutton ON/OFF for customer-installed closing cylinder (installation near lid).

Note: Only for PYROT and PYRTEC. For PYROMAT-DYN a special design is required.

Spec Sheet

Fuel Conveyance System
Fuel Replenishment System

Köb Holzheizsysteme GmbH, Flotzbachstr. 33, A-6922 Wolfurt, Tel. [phone], Fax 65707, E-Mail: [e-mail]

Subject to technical changes

8160-2

2009-03-01_GB

Dimensions and Data:

[Art. No.]

Boiler
control
system

Drive
power
[kW]
3 x 400V

Output
speed
[min

-1

]

FS-1
7388012

ECO

FS-2
7387898

PYR

5.5 83

1) Filling opening for:
Silo lid, manual 250 kg/m

2

, 2.9/1.3 m

[Art. No. FD-011], Spec Sheet 8110-1

Conveying capacity with 2
augers:

Approx. value: 35-55 m

3

/h

Degree of filling depending on:

- Spatial situation

- Fuel (angle of heap)

- Positioning of the Silo Feed Augers

- Type of extraction system