Koala Kare KB108 User Manual

KOALA KARE PRODUCTS

Installation and Operation Instructions

KB108 Oval “Baby Bear” Baby Changing Station

Cambiador Plegable

Table à Langer

Babywickeltisch

Your unit can be installed to meet ADA regulations when and where applicable. Refer to
Federal Register, Volume 56, No 144 28 CFR Part 36.

You are responsible for the safe operation of this unit.

IMPORTANT. RETAIN FOR FUTURE REFERENCE. READ CAREFULLY.
IMPORTANTE. GUÁRDELO PARA FUTURAS CONSULTAS. LEER ATENTAMENTE.
IMPORTANT. À CONSERVER POUR INFORMATION. À LIRE ATTENTIVEMENT.
WICHTIG. ZUR SPÄTEREN BEZUGNAHME AUFBEWAHREN. BITTE SORGFÄLTIG
DURCHLESEN.

®

Koala Kare Products ǁ 6982 S Quentin St. ǁ Centennial, CO 80112 Toll Free: 888.733.3456 ǁ 303.539.8300 ǁ Fax: [phone]

www.koalabear.com

OPERATING INSTRUCTIONS

Please Note:

To assure proper installation, it is suggested that a qualied person or carpenter install the Koala
Kare Baby Changing Station. Koala Kare Products will not be responsible if the station is not
installed properly.
Koala Kare Baby Changing Stations have been tested to hold a substantial static load. The unit

must be attached to a permanent wall that is capable of holding a substantial load.

Inspection Criteria:

A properly maintained Baby Changing Station:

- Opens and closes smoothly.

- Has both ends of a functioning, non-frayed strap: buckle clicks when closed and strap is
attached at both ends of unit.

- Offers parents liners through a fully stocked liner dispenser. (Dispenser is built into unit).

- Provides a clean, convenient place for customers to attend to their children.

TOOLS NEEDED

Gloves Phillips Head

Screwdriver

Drill 1/8” Drill Bit

(regular and
masonry)

HARDWARE PROVIDED

Four 1/4”x 3” Phillips Panhead Wood
Screws

Stud
Finder

Level Pencil

7/32” Drill Bit
(regular and
masonry)

Four ¾” x ¼”
Flat
Washers

Measuring
Tape