Koala Kare 884-KIT User Manual
KB318 and KB319 BISTRO HIGH CHAIR
REPLACEMENT CROTCH STRAP INSTRUCTIONS
Tools Required:
One Phillips Head Screwdriver
Parts Supplied:
Crotch Strap
One ½” Modied Truss Head Wood Screw
1. Flip the chair over so that the underside
of the seat is visible.
2. Using a Phillips Head screwdriver
remove the screw securing the crotch
P/N 884-KIT
strap to the underside of the seat.
3. Discard the old strap and screw.
4. Take the new strap and fold it over the
front plastic loop on the chair, so that you
have equal length of strap on both sides.
5. Take hold of both ends of the strap
and pull it tight under the chair. Using the
screw provided, screw through both ends
of the strap and into the hole where the
original screw was located.
6. Ensure the screw is secured to the
chair, before ipping the chair over and
returning it to use.
®
Koala Kare Products ǁ 6982 S Quentin St. ǁ Centennial, CO 80112 Toll Free: 888.733.3456 ǁ 303.539.8300 ǁ Fax: 303.539.8399
www.koalabear.com
P/N 160 December 2011
Loading...