Koala Kare 311-KIT User Manual

INFANT SEAT KRADLE (ISKM) REPLACEMENT

STRAP INSTRUCTIONS

Tools Required:

Scissors

1. Locate the end of the strap where the
ISKM legs cross. Using a pair of scissors, cut
through the loop and remove the entire strap

P/N 311-KIT

from the unit (Fig. 1) by un-threading it from
the strap holder on the mesh.

NOTE: The non-removable strap ring (Fig. 2)
must stay in place.

2. Insert end of replacement strap through
strap ring with buttons facing outward
(Fig. 3). Snap together and test that all snaps
are engaged by pulling on the strap at the
buckle (Fig. 4).

3. Repeat on other side.

Fig. 1

Fig. 2

Fig. 3

4. Feed buckle end of straps through the
strap loops on the mesh.

5. Buckle strap and close unit. Buckles

Fig. 4

should remain fed through the strap loops at
all times.

®

Koala Kare Products ǁ 6982 S Quentin St. ǁ Centennial, CO 80112 Toll Free: 888.733.3456 ǁ 303.539.8300 ǁ Fax: [phone]

www.koalabear.com

P/N 312 November 2010