Koala Kare 1017-COLOR-KIT User Manual
KB318 and KB319 BISTRO HIGH CHAIR
Screwdriver
Screws
REPLACEMENT PURSE TRAY INSTRUCTIONS
Tools Required:
Phillips Head Screwdriver
Materials Supplied:
Purse Tray
Two Modied Truss Head Wood Screws
1. Using a Phillips Head
screwdriver, remove the two
screws that hold the purse tray to
the lower leg rails.
P/N 1017-COLOR-KIT
2. Discard the old screws and
purse tray.
3. Take the new purse tray and
position it on the lower leg rails so
that the vertical face is towards
the front of the chair. Align the two
holes in the purse tray with the
holes in the lower leg rails (where
the old screws were removed).
4. Using one of the wood screws
provided, secure one side of the
purse tray to the chair by screwing
through one of the holes in the tray
and into the hole in the lower leg
rail.
5. Repeat step 4 on the opposite
side of the purse tray.
Koala Kare Products ǁ 6982 S Quentin St. ǁ Centennial, CO 80112 Toll Free: 888.733.3456 ǁ 303.539.8300 ǁ Fax: 303.539.8399
®
www.koalabear.com
P/N 1016 April 2011
Loading...