KOA CCTV K5702 User Manual
1x2 HDMI 2.0a Splitter with Built-in &
User Adjustable EDID Management
User Manual
rev: 170203
Made in Taiwan
K5702
Safety and Notice
The K5702 1x2 HDMI 2.0a Splitter with Built-in & User Adjustable EDID Management has been
tested for conformance to safety regulations and requirements, and has been certified for
international use. However, like all electronic equipments, the K5702 should be used with care.
Please read and follow the safety instructions to protect yourself from possible injury and to minimize
the risk of damage to the unit.
● Follow all instructions and warnings marked on this unit.
● Do not attempt to service this unit yourself, except where explained in this manual.
● Provide proper ventilation and air circulation and do not use near water.
● Keep objects that might damage the device and assure that the placement of this unit is on a
stable surface.
● Use only the power adapter and power cords and connection cables designed for this unit.
● Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device
before cleaning.
TABLE OF CONTENTS
INTRODUCTION ................................................................................................................. 1
FEATURES ......................................................................................................................... 1
PACKAGE CONTENTS ...................................................................................................... 1
SPECIFICATIONS .............................................................................................................. 2
PANEL DESCRIPTIONS ..................................................................................................... 3
HARDWARE INSTALLATION ............................................................................................. 4
CONNECTION DIAGRAM ................................................................................................... 4
NOTICE............................................................................................................................... 5
WARRANTY ........................................................................................................................ 6
1
INTRODUCTION
The
K5702 1x2 HDMI 2.0a Splitter with Built-in & User Adjustable EDID Management
provides
the most cost effective and advanced HDMI splitter solution on the market, by which the high definition
video and high quality audio can be transmitted to 2 different locations without losing quality.
K5702
supports HDR and the true 4K2K video!
With built-in USB firmware update mechanism, the compatibility among countless HDMI sources
and receivers can be further guaranteed. With the upmost HDR/4K2K@60 4:4:4 8bits and high definition
audio support, K5702 is suitable for high quality HDMI broadcasting, digital signage and education
applications!
FEATURES
● HDMI 2.0a compliant
● Supports 4K2K@60 4:4:4 8bits
● Supports HDR*, which is 4K2K@60 4:2:0 10bits**
● HDCP 2.2 and 1.4 compliant
● Wide frequency range: 25MHz~600MHz
● Video bandwidth: 18Gbps
● Supports default EDID and EDID learning from display
● Supports xvYCC, x.v.Color & Deep Color
● Mini-USB firmware update for expanding compatibility
● Supports Dolby Digital, DTS -HD and Dolby TrueHD audio
● Easy installation
PACKAGE CONTENTS
● 1x K5702
● 1x DC 5V2A wal l wart
● 1x User Manual
* HDR = High Dynamic Range.
** The video bandwidth of 4K2K@60 4:2:0 10bits (HDR) is 384 MHz, and the 4K2K@60 4:4:4
8bits is 594MHz.
Loading...