Knoll Pixel KYPW8436C, Pixel KYPW7236C Installation Instructions Manual

PIXEL™ Installation Instructions

Y-Leg Flip-top Tables

Casters only

Related tables:

KYPW7236C

KYPW8436C

Unboxing

You should have received your top plus two boxes per table.

Box 1 includes:

Leg assemblies, hardware in a red plastic bag, and installa-

tion instructions.

Box 2 includes:

Horizontal rails

Please pay close attention to torque requirements.

Step 1.

Attach the leg assemblies (A) on each end of the
two horizontal rails (B) with flat head 1/4 - 20
screws (C), 4 per rail. Use 5/32” allen wrench,
torque: 50 in/lbs

Parts list

1 Table top

2 Leg assemblies

2 Horizontal rails

2 Top brackets

Tools needed

Allen wrenches

Phillips screwdriver

Torque wrench

C

A

Hardware

8 Flat head 1/4 - 20 screws

8 Socket cap head 1/4 - 20 screws

4 5/16” Shoulder screws

2 Vertical wire management clips

(clear plastic)

4 Horizontal wire management clips

with wood screws

C

B

A

C

4AU6007 - Oct 2015
Page 1 of 3

B

Fig. 1

C

PIXEL™ Installation Instructions

Y-Leg Flip-top Tables

Step 2.

Lay the inverted table top on the floor.

E

Attach table top brackets (D) to table top
with socket cap head 1/4 - 20 screws (E)
4 per bracket. Use 3/16” allen wrench,
torque: 130 in/lbs

Step 3.

Position the leg and horizontal rail
subassembly (F) on the underside of
the top. Align and attach the leg and
horizontal rail subassembly with the
table top brackets (G), using 5/16”
shoulder screws (H), 2 per casting. Use
5/32” allen wrench, torque: 50 in/lbs

E

D

Fig. 2

D

F

H

4AU6007 - Oct 2015
Page 2 of 3

Fig. 3

G

H

G