Knoll Pixel KTXW7230, Pixel KTXW6036, Pixel KTXW6030, Pixel KTXW7236 Installation Instructions Manual
PIXEL™ Installation Instructions
T-Leg Fixed Height Fixed-top Tables
Glides or casters
Related tables:
KTXW6030
KTXW7230
KTXW6036
KTXW7236
* Glides shown
Unboxing
You should have received your top plus two boxes per table.
Box 1 includes:
T-Leg assemblies, hardware in a red plastic bag, and
installation instructions.
Box 2 includes:
Wire management trough and flip door.
Please pay close attention to torque
requirements.
Step 1.
Slide the flip door (A) in from the end of
the wire management trough groove.
Step 2.
Attach the wire management trough
to the T-legs. Use socket cap head
B
1/4”-20 x 1” screws (C), 2 per leg, use
5/32” allen wrench, torque: 50 in/lb.
C
Use flat head 1/4”-20 x 1/2” screws
(D), 2 per leg, use 3/16” allen wrench,
torque: 50 in/lb.
Parts list
1 Table top
1 Left T-leg assembly
1 Right T-leg assembly
2 Table top support castings
1 Wire management trough
1 Flip door
Tools needed
Phillips screwdriver
Allen wrenches
Torque wrench
D
Hardware
4 Socket cap head 1/4”-20 x 1” screws
4 Socket cap head 1/4”-20 x 2” screws
4 Flat head 1/4”-20 x 1/2” screws
10 Socket cap head 5/16”-18 x 1” screws
2 Vertical wire management clips
(clear plastic)
4 Horizontal wire management clips
with wood screws
C
A
B
D
Step 3.
Drop the trough end covers (B) into
the slots on each leg upper casting.
4AU6003 - Oct 2015
Page 1 of 3
A
Fig. 1
Fig. 2
PIXEL™ Installation Instructions
T-Leg Fixed Height Fixed-top Tables
Step 4.
Attach the two table top supports (E) to the trough with
socket cap head 1/4”-20 x 2” screws (F), torque: 50 in/lb, 2
per support.
F
E
F
E
4AU6003 - Oct 2015
Page 2 of 3
Fig. 3
Loading...