Knightsbridge TPB14SLED Installation & Maintenance Manual

INSTALLATION & MAINTENANCE MANUAL

IP

44

230V

50Hz

TPB14SLED

02

1

GENERAL INSTRUCTIONS

These instructions should be read carefully and retained after installation by the end user for

future reference and maintenance

These instructions should be used to aid installation of the following luminaire:

TPB14SLED

SAFETY

• Installation of this luminaire should only be carried out by a qualified electrician or competent
person to the latest Building and current IEE Wiring Regulations (BS7671)

• Please isolate mains prior to installation/maintenance

• Check the total load on the circuit (including when this luminaire is fitted) does not exceed the
rating of the circuit cable, fuse or circuit breaker

• Please note the IP (Ingress of Protection) rating of this luminaire when deciding the location for
installation

• This product is Class II double insulated

• This product is non-dimmable

• This product is IP44 rated

INSTALLATION

• Provide power to the required point of installation. Suitable IP rated junctions boxes should be

used where required

• Remove the diffuser by rotating bezel anti-clockwise (see Fig 1)

Fig 1

• Loosen the 3 LED plate screws (see Fig 2)

• Remove the LED plate and disconnect from the driver (via the DC socket) (see Fig 3)

2

Fig 2