11
140mm
USB CHARGER SPECIFICATION
It is not applicable for the digital products with internal protection or the
ones requiring driving programme.
Output Voltage : DC 5V
Total Output Current : Max. 2400mA
This product contain short circuit protection and overload protection.
If the USB power stopped supply. Please make sure the USB sockets
do not contact with any metals or moisture. Once the socket has been
cleared, the circuit will re-sets and power on automatically.
CAUTION:
BLUETOOTH CONNECTION
This equipment was designed at Overvoltage Category III circuit,
this provide a better voltage insulation for the equipment in fixed
installations.
Output Power : Max. 3W
Sensitivity : L/R 380MV
SNR : >80db
Speaker Frequency Range : 280Hz-16KHz
Bluetooth
- Switch on the power, you will see the bluetooth signal indicator
start flashing.
- Open your mobile device and turn on the bluetooth function,
connect the device named “Kengo” or “Kengo0001” (note: if the
name showing “Kengo0001” it means the number digit would
be different.)
- Then press connect to the device, if the connection ok, then you
will hear a “bip” sound and the bluetooth signal indicator flashing
a different frequency.
- Onced connected, you can start play the music now.
Switch On Button
& Signal Indicator
BLUETOOTH AUDIO SPECIFICATION
140mm
USB CHARGER SPECIFICATION
It is not applicable for the digital products with internal protection or the
ones requiring driving programme.
Output Voltage : DC 5V
Total Output Current : Max. 2400mA
This product contain short circuit protection and overload protection.
If the USB power stopped supply. Please make sure the USB sockets
do not contact with any metals or moisture. Once the socket has been
cleared, the circuit will re-sets and power on automatically.
CAUTION:
W i r i n g D i agra m s
BLUETOOTH CONNECTION
This equipment was designed at Overvoltage Category III circuit,
this provide a better voltage insulation for the equipment in fixed
installations.
Output Power : Max. 3W
Sensitivity : L/R 380MV
SNR : >80db
Speaker Frequency Range : 280Hz-16KHz
Bluetooth
Switch On Button
& Signal Indicator
BLUETOOTH AUDIO SPECIFICATION
WARNING
BLUETOOTH AUDIO SPECIFICATION
Bluetooth
ML Accessories Limited
LU5 5TA
www.mlaccessories.co.uk
SCREWLESS – 13A SOCKET WITH USB CHARGER AND BLUETOOTH
SPEAKER
These instructions should be read carefully and retained after installation
for further reference and maintenance.
SAFETY
• Before installation/maintenance, ensure that the mains supply is switched
off and the circuit fuses are removed or circuit breakers switched off
• This product must be installed in accordance with the latest edition of the
IEE Wiring Regulations and current Building Regulations. If in any doubt,
consult a qualified electrician
• 230V 50Hz
• Do not overload this accessory or subject it to conditions outside its rating
• Please recycle
SCREWLESS FRONT PLATE FIXING
• Always ensure the wall surface is flat and smooth
• Remove the front plate by placing a medium size flat head screwdriver in
the notch at the side and lever off gently
• Fix the main unit to the back box using the fixing screws supplied
• Clip the front plate back onto the main assembly ensuring the
screwdriver notch is at the side
• The main unit is fitted with a gasket, this MUST NOT be removed, this
gasket is to stop discolouration of the front plate due to natural moisture
in some wall finishes
• To maintain the finish of this product, periodically wipe over with a soft
dry cloth only
INSTALLATION
• Connect this accessory as per the wiring diagram
• All earth connections must be made and maintained. Use green/yellow
sleeving on earth conductors that are not insulated
• Fit the unit into a suitable wall box taking care not to compress, damage
or trap any cables, and secure with the screws provided
• Check all connections are secure
WIRING
L – LIVE – Brown
N – NEUTRAL – Blue
EARTH – Green / yellow
• All Screwless products MUST have an earth connection between the
front plate and back box
• Use green and yellow sleeving on earth conductors that are not insulated
* Note – if your installation uses four lug metal mounting box, remove the
top and bottom lugs or bend fully back
IF IN ANY DOUBT PLEASE CONSULT A QUALIFIED ELECTRICIAN
Radio Equipment
Directive (RED) Compliant
Fig 1
USB Charger Specification
Output Voltage: 5V
Total Output Current: Max. 2400mA
CAUTION
This socket is designed for charging portable USB devices only and
contains a short circuit and overload protection feature. If there is no
power from the USB socket unplug the connected device, check to ensure
the USB socket and USB device have not come into contact with water,
liquid or debris and the cable to the device is not damaged. With no device
connected to the USB socket it will automatically reset and be ready for
use.
BLUETOOTH AUDIO SPECIFICATION
• Output Power: Max. 3W
• Sensitivity : L/R 380MV
• SNR : >80db
• Speaker Frequency Range : 280Hz-16KHz
Bluetooth
! !
This unit should NOT be subject to any insulation resistance
testing, failure to follow this instruction could cause damage
to the USB circuit and void the warranty
.
BLUETOOTH CONNECTION
• Push power button to switch speaker on - bluetooth signal indicator will
4
L
N
start flashing
• Activate Bluetooth on your mobile device, and scan for Bluetooth devices
• Connect to the device named “SPEAKER001” or “SPEAKER002” etc. If a
connection to the Bluetooth speaker has been established you will hear a
“beep” sound and the Bluetooth indicator will start flashing at a different
frequency to confirm
Power-on button
/ signal indicator
WARRANTY
This product has a warranty of 3 years from date of purchase. Failure
to install this product in accordance with the current edition of the IEE
Wiring regulations (BS7671), improper use or removal of the batch codes
will invalidate the warranty. If this product should fail within its warranty
period it should be returned to the place of purchase for a free of charge
replacement. ML Accessories does not accept responsibility for any
installation costs associated with the replacement product. Your statutory
rights are not affected. ML Accessories reserve the right to alter product
specification without prior notice.
Loading...