INSTALLATION & MAINTENANCE MANUAL
ACCESSORIES LTD
DC007
92
1
GENERAL INSTRUCTIONS
INSTALLATION & MAINTENANCE MANUAL
DC007
These instructions should be read carefully and retained after installation by the end user for future
reference and maintenance.
These instructions should be used to aid installation of the following product:
DC007
Accessories list
1 x Receiver
2 x Bell push
2 x CR2032 batteries for bell pushes
2 x Double-sided adhesive pads
1 x Instruction manual
Depiction of accessories
These instructions should be read carefully and retained after installation by the end user for
future reference and maintenance.
These instructions should be used to aid installation of the following product:
DC007
Accessories list
1 x Receiver
2 x Bell push
2 x CR2032 batteries for bell pushes
2 x Double-sided adhesive pads
1 x Instruction manual
Legend
1. Speaker
2. Plug
3. Push button
4. Nameplate cover
5. Front cover and back cover
hook
6. Standby holes for screws
7. Release slot
8. Melody selection button
INSTALLATION
Notes prior to installation
• If not using the double-sided adhesive pad, fixing screws and wall plugs will be required (not included)
• Avoid positioning the bell push on metal door frames as this may affect the signal
• Avoid positioning above or near heat sources such as radiators, or in damp areas such as kitchens and
bathrooms
• Please note the IP (Ingress Protection) rating of the bell push when deciding the location for installation
• The bell push is IP44 rated
2
Loading...