Unit E, Chiltern Park, Boscombe Road,
INSTALLATION AND MAINENANCE MANUAL
8300BC / 8300PC / 8300MW / 8300MB
These instructions should be read carefully and retained after installation by the end user for future reference
and maintenance.
These instructions should be used to aid installation of the following products:
8300BC / 8300PC / 8300MW / 8300MB
SAFETY
• This product must be installed in accordance with the latest edition of the IEE Wiring Regulations
(BS7671) and current Building Regulations. If in any doubt, consult a qualified electrician
• Please isolate mains prior to installation or maintenance
• Please note the IP (Ingress Protection) rating of this product when deciding the location for installation
• Do not overload this accessory or subject it to conditions outside its rating
• This product is Class II double insulated
• This product is IP20 rated
INSTALLATION
• Provide power to the required point of installation. If replacing an existing switch, make a note of the
connections before removing the old switch
• Unscrew the terminal cover
• This accessory can be mounted onto a round dry lining box or pattress. Alternatively, to surface mount,
using the base plate as a template, mark the location for, and drill the fixing holes ensuring not to
infringe with any gas / water pipes or electrical cables. Fix to a solid surface using suitable fixings
• Ensuring correct polarity is observed, carefully wire as shown in Fig. 1. The earth terminal is non-
functional and only provided for convenience. Check all connections are tight with no loose strands
outside the terminals
ML Accessories Limited
Dunstable, LU5 4LT
www.mlaccessories.co.uk
INSTALLATION
• Provide power to the required point of installation. If replacing an existing switch,
make a note of the connections before removing the existing switch
• Unscrew the terminal cover
INSTALLATION AND MAINTENANCE MANUAL
These instructions should be read carefully and retained after installation by
the end user for future reference and maintenance.
These instructions should be used to aid installation of the following products:
8300XX
SAFETY
• This product must be installed in accordance with the latest edition of the IEE Wiring
Regulations (BS7671) and current Building Regulations. If in any doubt, consult a
qualified electrician
• Please isolate mains prior to installation or maintenance
• Please note the IP (Ingress Protection) rating of this product when deciding the
location for installation
• Do not overload this accessory or subject it to conditions outside its rating
• This product is Class II double insulated
• This product is IP20 rated
Fig. 1
• This accessory can be mounted onto a round dry lining box or pattress. Alternatively,
to surface mount, using the base plate as a template, mark the location for, and drill
the fixing holes ensuring not to infringe with any gas/water pipes or electrical cables.
Fix to a solid surface using suitable fixings
• Ensuring correct polarity is observed, carefully wire as shown in Fig. 1. The earth
terminal is non-functional and only provided for convenience. Check all connections
are tight with no loose strands outside the terminals
• Refit the cover
• Switch on and check for correct operation
GENERAL
This product should be recycled in the correct manner when it reaches the
end of its life. Check local authorities for where facilities exist.
Clean with a soft dry cloth only, do not use aggressive cleaning products or
solvents which may damage the product
WARRANTY
This product has a warranty of 1 year from date of purchase. Failure
to install this product in accordance with the current edition of the IEE
Wiring Regulations (BS7671), improper use, or removal of the batch code
will invalidate the warranty. If this product should fail within its warranty
period it should be returned to the place of purchase for a free of charge
replacement. ML Accessories does not accept responsibility for any
installation costs associated with the replacement product. Your statutory
rights are not affected. ML Accessories reserve the right to alter product
specification without prior notice.
DCAUG20_V3
Loading...