Knape&Vogt MUV+, MUVAB 14, MUVAB 10, MUVAB 9, MUVAB 12 Series Manual
...
Full Extension Soft-Close
Undermount Drawer Slide
Number:
Mounting:
Height:
Load Rating:
Finish:
Travel:
Sizes:
Packaged:
Release Lever:
Rear Brackets:
Fasteners:
Install Jig:
SPECIFICATIONS
Full Extension Soft-Close Undermount Drawer Slide
Side, for Frame or Frameless Construction
1-7/8"
75-Pound Class
Zinc
Full Extension 14"–22", Partial 9"–12"
9", 10", 12", 14", 15", 16", 18", 20", 21", 22"
Bulk (B): 6 Pairs per Carton. Lengths 14"-22".
Bulk (B): 4 Pairs per Carton. Lengths 9"-12".
MUV1D-RL: Up/Down Height Adjustment. 60 pairs per carton
MUV2D-RL: Up/Down Height, Side-to-Side Adjustment. 24 pairs per carton
MUV3D-RL: Up/Down Height, Side-to-Side, In/Out Adjustment. 12 pairs per carton
MUVRL INSET: Inset Adjuster (MUV2D-RL Add On). 12 pairs per carton
MUV-RBM: Metal Rear Bracket (for use on 14", 15", 16", 18", 20", 21", 22" Slides). 12 Brackets (Unhanded)
MUV-RBP: Plastic Rear Brackets (for use with 9", 10", 12" Slides). 8 Brackets (4 Right Hand, 4 Left Hand)
MUV-122: #7 x 5/8" Flat Head Screw – Slide
MUV-123: #6 x 1/2" Truss Head Screw – Front Release Levers and Rear Bracket
MUV-124
Material Thickness
For use with the following
material thicknesses:
5/8" [16mm]
9/16" [14mm]
1/2" [13mm]
15/16"
[24mm]
DRAWER ASSEMBLY
Optimal Operation Guidelines for Drawer Width Based on Drawer Height:
Drawer Height up to 6": Max. Width = Slide Length + 10"
Drawer Height Greater than 6": Max. Width = Slide Length + 10"
Drawer Hight Greater than 8": Max. Width = Slide Length + 10"
Drawer Height Greater than 10": Max. Width = Slide Length + 10"
Reference Page 6 for two critical drawer dimensions:
• Max. Drawer Bottom Recess
• Inside Drawer Width
DRAWER HARDWARE INSTALLATION
1-1/4"
[32mm]
Release Lever Adjustment (1/8")
(Vertical Adjustment)
or 28", whichever is less
or 24", whichever is less
or 21", whichever is less
Drawer Bottom
1/4" [6.3mm]
Variable
Pre-drill front holes
Drawer Bottom
1
at 15º angle.
Full Extension Soft-Close Undermount Drawer Slide
RELEASE LEVERS
HEIGHT ADJUSTMENT
MUV1D-RL
Height
HEIGHT & SIDE-TO-SIDE & IN/OUT ADJUSTMENT
MUV3D-RL
Height
In/Out
Side-to-side
HEIGHT & SIDE-TO-SIDE ADJUSTMENT
MUV2D-RL
Height
IN/OUT ADJUSTMENT
MUVRL INSET (add onto MUV2D-RL)
Part
Number
MUV1D-RL
MUV2D-RL
MUV3D-RL
Height Side-to-Side In/Out
+ 1/8" [3mm] – –
+ 1/8" [3mm] ± 1/16" [1.5mm] –
+ 1/8" [3mm] ± 1/16" [1.5mm] + 3/32" [2.5mm]
Side-to-side
Slide
MUVAB 22
MUVAB 21
MUVAB 20
MUVAB 18
MUVAB 16
MUVAB 15
BOTTOM HOLE PATTERN
57/64" [22.5mm]
B
11/32"
11/32"
[9mm]
Cabinet
Depth
24" [610mm] 22-3/4" [578mm] 22.4" [569mm] 22" [559mm] 21.84" [554.7mm] 39/64" [15.5mm] 57/64" [22.5mm] 14-7/8" [378mm]
24" [610mm] 21-3/4" [553mm] 21.4" [544mm] 21" [533mm] 20.84" [529.3mm] 39/64" [15.5mm] 57/64" [22.5mm] 14-7/8" [378mm]
24" [610mm] 20-3/4" [527mm] 20.4" [518mm] 20" [508mm] 19.84" [503.9mm] 39/64" [15.5mm] 57/64" [22.5mm] 14-17/32" [369mm]
21" [533mm] 18-3/4" [479mm] 18.4" [467mm] 18" [457mm] 17.84" [453.1mm] 39/64" [15.5mm] 57/64" [22.5mm] 12-1/8" [308mm]
21" [533mm] 16-3/4" [425mm] 16.4" [417mm] 16" [406mm] 15.84" [402.3mm] 39/64" [15.5mm] 57/64" [22.5mm] 9-13/16" [249mm]
18" [457mm] 15-3/4" [403mm] 15.4" [391mm] 15" [381mm] 14.59" [370.6mm] 39/64" [15.5mm] 57/64" [22.5mm] 9-7/16" [240mm]
Min.
Interior Depth
Slide
Length
Drawer
Length
C
Travel
Length
A B C
[9mm]
2-41/64"
[67mm]
A
39/64"
[15.5mm]
2
Loading...