Knape&Vogt MUV 22, MUV 21, MUV 20, MUV 18, MUV 16 User Manual
...
Full Extension Soft-Close
Undermount Drawer Slide
Number:
Mounting:
Height:
Load Rating:
Finish:
Travel:
Sizes:
Packaged:
Rear Brackets:
Fasteners:
Install Jig:
SPECIFICATIONS
Full Extension Soft-Close Undermount Drawer Slide
Side, for Frame or Frameless Construction
1-7/8"
75-Pound Class
Zinc
Full Extension
9", 10", 12", 14", 15", 16", 18", 20", 21", 22"
Bulk (B): 6 Sets per Carton. Includes Front Release Levers (14"+).
Bulk (B): 4 Sets per Carton. Includes Front Release Levers (9",10",12").
MUV-RBM Metal Rear Bracket (for use on 14",15",16",18",20",21",22" Slides). 12 Brackets (Unhanded).
MUV-RBP Plastic Rear Brackets (for use with 9",10",12" Slides). 8 Brackets (4 Right Hand, 4 Left Hand).
MUV-122: #7 x 5/8" Flat Head Screw – Slide
MUV-123: #6 x 1/2" Truss Head Screw – Front Release Levers and Rear Bracket
MUV-121
Material Thickness
For use with the following
material thicknesses:
5/8" [16mm]
9/16" [14mm]
1/2" [13mm]
If material is less than 1/2" drawer length
must be sized shorter by same amount.
DRAWER ASSEMBLY
31/32"
[24.6mm]
Optimal Operation Guidelines for Drawer Width Based on Drawer Height:
Drawer Height up to 6": Max. Width = Slide Length + 10"
Drawer Height Greater than 6": Max. Width = Slide length + 10" or 28",
whichever is less
Drawer Height Greater than 8": Max. Width = Slide Length + 10" or 24",
whichever is less
Drawer Height Greater than 10": Max. Width = Slide Length + 10" or 21",
whichever is less
DRAWER HARDWARE INSTALLATION
29/32"
[23mm]
Release Lever Adjustment (1/8")
(Vertical Adjustment)
Drawer Bottom
1/4" [6.3mm]
Variable
Drawer Bottom
Pre-drill front holes
at 15º angle.
1
Full Extension Soft-Close Undermount Drawer Slide
Bracket:
3/16" to 1-7/8" [5mm to 48mm] Slides 14" +
3/16" to 1-1/16" [5mm to 27mm] Slides 9" to 12"
FACE FRAME APPLICATIONS
Cabinet Depth
Interior Depth
Slide Length
Drawer Length
Interior Depth Range
L
[WITH DECORATIVE FRONT]
Variable Setback
Setback 5/32" [4mm]
Mount Position
3/8" [10mm]
1-7/16"
[37mm]
Max. Drawer Height=
Opening minus 13/16"
Bottom
[20mm]
Recess
1/2" max.
[12.7mm]
Bottom Clearance
9/16" [14mm]
Drawer Gap
1/32" [1mm]
31/32"
[25mm]
Min. Top Gap
1/4" [6mm]
Face Frame Inset Application
Setback
Setback = Drawer Front Thickness + 3/16" [5mm]
Depth Range
Min. = Slide Length + Setback + 3/16" [5mm]
1-7/16"
[37mm] TYP.
Rear Slide Detail
11/32"
[9mm]
TYP
31/32"
[25mm] TYP.
11/32"
[9mm]
1-15/32"
[37.5mm]
Slide Front Detail
1-1/4"
[32mm]
11/32"[9mm]
1-5/16"
[33mm]
TYP.
31/32"
[25mm]
1/4"
[6mm]
1-7/16"
[37mm]
Max. = Slide Length + Setback + 1-15/16" [49.2mm] Slides 14"+
Max. = Slide Length + Setback + 1-1/16" [27mm] Slides 9",10",12"
SLIDE CABINET DEPTH SLIDE LENGTH DRAWER LENGTH MAX INTERIOR DEPTH MIN INTERIOR DEPTH MAX. MATERIAL THICKNESS SETBACK
MUV 22 24" [610mm]* 22.4" [569mm] 22" [559mm]** 24-9/16" [624mm] 22-7/8" [581mm] 5/8" [16mm] 5/32" [4mm]
MUV 21
MUV 20 24" [610mm]* 20.4" [518mm] 20" [508mm]** 22-9/16" [573mm] 20-7/8" [530mm] 5/8" [16mm] 5/32" [4mm]
MUV 18
MUV 16 21" [533mm]* 16.4" [417mm] 16" [406mm]** 18-9/16" [472mm] 16-7/8" [429mm] 5/8" [16mm] 5/32" [4mm]
MUV 15
MUV 14 18" [457mm]* 14.4" [366mm] 14" [356mm]** 16-9/16" [421mm] 14-7/8" [378mm] 5/8" [16mm] 5/32" [4mm]
MUV 12
MUV 10 12" [305mm] 10.15" [258mm] 10" [254mm]** 11-3/4" [298mm] 10-3/4" [273mm] 5/8" [16mm] 5/32" [4mm]
MUV 9
*When using rear bracket at maximum extension.
24" [610mm] 21.4" [544mm] 21" [533mm]** 23-9/16" [598mm] 21-7/8" [555mm] 5/8" [16mm] 5/32" [4mm]
21" [533mm] 18.4" [467mm] 18" [457mm]** 20-9/16" [522mm] 18-7/8" [479mm] 5/8" [16mm] 5/32" [4mm]
18" [457mm] 15.4" [391mm] 15" [381mm]** 17-9/16" [446mm] 15-7/8" [403mm] 5/8" [16mm] 5/32" [4mm]
15" [381mm] 12.4" [315mm] 12" [305mm]** 13-3/4" [349mm] 12-3/4" [324mm] 5/8" [16mm] 5/32" [4mm]
12" [305mm] 10.15" [258mm] 9" [229mm]** 11-3/4" [298mm] 10-3/4" [273mm] 5/8" [16mm] 5/32" [4mm]
**If material is less than 1/2” drawer length must be sized shorter by same amount.
2
Loading...