Knape&Vogt BYP-60A User Manual [en, fr, es]
SLIDING DOOR HARDWARE - BY PASS
BYP-60A • For 2 or 3 doors up to 60 lbs. each with thickness of 3/4" to 1-3/8"
Tools Required • Outils requis • Herramientas requeridos
Drill (3/32") • Perceuse (3/32") • Taladro (3/32")
Phillips Screw Driver • Tournevis Phillips • Destornillador Phillips
Fine Tooth Saw (optional) • Scie à dents nes (optionnelle) • Sierra de dientes nos (opcional)
Flat Head Screw Driver • Tournevis à tête plate • Destornillador de cabeza plana
CONTENTS 2-Door 3-Door
#310301_B (1112)
Assembly
Instructions
A. Track 1 1
B. Carrier A Offsets 2 2
C. Carrier B Offsets 2 4
D. Pull 2 3
E. Floor Guide 1 2
F. #8 x 3/4" Phillips Pan Head Screw 13 26
G. #8 x 1-1/4" Phillips Pan Head Screw 7 14
H. Door Stop 1 1
B.
D.
C.
F.
G.
QUINCAILLERIE POUR PORTE COULISSANTE – BY PASS
BYP-60A • Pour 2 à 4 portes jusqu’à 56,7 kg chacune d’une épaisseur de 2,9 cm à 4,4 cm
CONTENU 2-Portes 3-Portes
A. Coulisse 1 1
B. Supports a rouleaux décalés A 2 2
C. Supports a rouleaux décalés B 2 4
D. Guide de plancher 1 2
E. #8 x 3/4" Vis Phillips 13 26
tête cylindrique
CONTENU 2-Portes 3-Portes
F. #8 x 1-1/4" Vis Phillips 7 14
tête cylindrique
G. Butoir 1 1
A.
E.
H.
#310301_B (1112)
Instructions
d’assemblage
HERRAJE PARA PUERTA CORREDIZA - TIPO BY PASS
BYP-60A • Para 2 o 3 puertasde hasta 27,2 kg cada una y de 1,9 cm à 3,5 cm de grosor
CONTENIDO 2-Puertas 3-Puertas
A. Caril 1 1
B. Offsets del portador A 2 2
C. Offsets del portador B 2 4
D. Deslizador 2 3
E. Guía del piso 1 2
F. #8 x 3/4" Tornillos Phillips 13 26
de cabeza chaneada
CONTENIDO 2-Puertas 3-Puertas
G. #8 x 1-1/4" Tornillos Phillips 7 14
de cabeza chaneada
H. Tope de la puerta 1 1
#310301_B (1112)
Instrucciones para
el ensamblaje
SLIDING DOOR HARDWARE - BY PASS
PREPARE OPENING
1
Hmax = Door Height + 2-1/16"
Hmin = Door Height + 1-1/2"
Note: For 3/4" doors, use Carrier
A on rear door. For 1-3/8" door,
use Carrier A on front door.
#310301_B (1112)
Assembly
Instructions
2-Door Width = 2 x Door Width - 1"
3-Door Width = 3 x Door Width - 2"
Opening Height
Hauteur Ouverture
Altura Abertura
3/4" Door
1,9 cm Porte
1,9 cm Puerta
5/8"
(1,6 cm)
2-1/2"
(6,4 cm)
A
B
1-1/4" - 1-9/16"
(3,2 cm - 4 cm)
1"
(2,5 cm)
Front
Avant
Delantera
Door Height
Hauteur Porte
Altura Puerta
Opening Height
Hauteur Ouverture
Altura Abertura
1-3/8" Door
3,5 cm Porte
3,5 cm Puerta
1"
(2,5 cm)
2-1/2"
(6,4 cm)
1-1/4" - 1-9/16"
(3,2 cm - 4 cm)
Door Height
5/8"
(1,6 cm)
Front
Avant
A
Delantera
B
Hauteur Porte
Altura Puerta
3/8" - 1/2"
(1 cm - 1,3 cm)
MOUNT FRAME HARDWARE
2
• Center track in opening.
• Using track as template, mark screw locations.
• Drill 3/32" pilot holes and secure with (#8 x 1-1/4") s crews.
Note: If necessary, track
may be cut with a fine
tooth saw.
3/8" - 1/2"
(1 cm - 1,3 cm)
Loading...