Knape&Vogt BYP-275I User Manual [en, fr, es]
SLIDING DOOR HARDWARE - BY PASS
BYP-175I & BYP-275I • For 2 doors up to 175 lbs. (2-wheel) & 275 lbs. (4-wheel)
each with thickness of 1” to 1-3/4"
Tools Required • Outils requis • Herramientas requeridos
Wrench - 1/2" (included) • Clé - 1/2" (incluse) • Llave - 1/2" (incluida)
Drill (1/8", 3/8", 3/32") • Perceuse (1/8", 3/8", 3/32") • Taladro (1/8",3/8", 3/32")
Phillips Screw Driver • Tournevis Phillips • Destornillador Phillips
Fine Tooth Saw (optional) • Scie à dents nes (optionnelle) • Sierra de dientes nos (opcional)
CONTENTS 2-Door
A. Track 2
B. Carrier 4
C. Door Mount Plate 4
D. Adjusting Screw 4
E. Floor Guide 2
F. #10 x 1-1/2" Pan Head Screw 40
G. #6 x 7/8" Flat Head Screw 8
H. #12 x 1-1/4" Pan Head Screw 16
B.
C.
OR
#310305_B (1112)
Assembly
Instructions
A.
D.
F.
E.
G.
H.
QUINCAILLERIE POUR PORTE COULISSANTE – BY PASS
BYP-175I & BYP-275I • Pour 2 jusqu'à 79,3 kg (2-roue) y 124,7 kg (4-roues) chacune
d'une épasseur de 2,5 cm à 4,4 cm
CONTENU 2-Portes
A. Coulisse 2
B. Rouleaux décalés 4
C. Plaque de montage de porte 4
D. Vis d’ajustement 4
E. Guide de plancher 2
CONTENU 2-Portes
F. #10 x 1-1/2" Vis à tête bombée 40
G. #6 x 7/8" Vis à tête plate 8
H. #12 x 1-1/4" Vis tête cylindrique 16
HERRAJE PARA PUERTA CORREDIZA - TIPO BY PASS
BYP-125A & BYP-150A • Para 2 puertasde hasta 79,3 kg (2-rueda) y 124,7 kg (4-rueda)
cada una y de 2,5 cm à 4,4 cm de grosor
CONTENIDO 2-Puertas
A. Caril 2
B. Portador 4
C. Placa de montaje de puerta 4
D. Tornillo de ajuste 4
E. Guía del piso 2
CONTENIDO 2-Puertas
F. #8 x 5/8" Tornillos cabeza plana 40
G. #8 x 3/4" Tornillo cabeza plana 8
H. #8 x 1-1/2" Tornillos cabeza plana 16
Instrucciones para
#310305_B (1112)
Instructions
d’assemblage
#310305_B (1112)
el ensamblaje
SLIDING DOOR HARDWARE - BY PASS
PREPARE OPENING
1
Hmax = Door Height + 4-1/8" • Hmin = Door Height + 3-3/8"
2-Door Width = 2 x Door Width - 1"
Opening Width
Largeur d’ouverture
Anchura de la abertura
Opening Height
Hauteur Ouverture
Altura Abertura
#310305_B (1112)
Assembly
Instructions
3" - 3-3/4"
(7,6 cm - 9,5 cm)
Door Height
Hauteur Porte
Altura Puerta
3/16"
(0,5 cm)
MOUNT FRAME HARDWARE
2
• Center tracks in opening ush
against each other.
• IMPORTANT: Place hangers loose
into track before securing.
• Using track as template, mark
screw locations.
• Drill 3/32" pilot holes and
secure with (# 10 x 1-1/2") screws.
Note: If necessary, track may be cut
with a fine tooth saw.
MOUNT DOOR HARDWARE
3
• Place door mount plate on top
of each door at the distance
shown from the outside edge.
• Using plates as a template,
drill 1/8" diameter holes for
mounting and one 3/8"
clearance hole 1-1/2" deep for
adjustment screw and secure
with (#12 x 1-1/4") screws.
• Mount pulls (not included).
3/4"
(1,9 cm)
2-1/2"
(6,4 cm)
Loading...