Knape&Vogt BYP-250A User Manual [en, fr, es]
SLIDING DOOR HARDWARE - BY PASS
BYP-250A • For 2 doors up to 250 lbs. each with thickness of 1-3/8” to 1-3/4"
Tools Required • Outils requis • Herramientas requeridos
Wrench (included) • Clé (incluse) • Llave (incluida)
Drill (3/32", 3/16", 3/8") • Perceuse (3/32", 3/16", 3/8") • Taladro (3/32", 3/16", 3/8")
Phillips Screw Driver • Tournevis Phillips • Destornillador Phillips
Fine Tooth Saw (optional) • Scie à dents nes (optionnelle) • Sierra de dientes nos (opcional)
CONTENTS 2-Door
#310304_A (1012)
Assembly
Instructions
A. Track 2
B. Carrier 4
C. Quick Release Top Mount Plate 4
D. Door Guide 1
E. Spacer Kit 1
F. #8 x 1-1/2" Pan Head Screw 39
B.
C.
E.
F.
QUINCAILLERIE POUR PORTE COULISSANTE – BY PASS
BYP-250A • Pour 2 jusqu'à 113,3 kg chacune d'une épasseur de 3,5 cm à 4,4 cm
CONTENU 2-Portes
A. Coulisse 2
B. Rouleaux décalés 4
C. Plaque de montage supérieure 4
à dégagement rapide
D. Guide de plancher 1
CONTENU 2-Portes
E. Espaceur 1
F. #10 x 1-1/2" Vis tête cylindrique 39
A.
D.
#310304_A (1012)
Instructions
d’assemblage
HERRAJE PARA PUERTA CORREDIZA - TIPO BY PASS
BYP-125A & BYP-150A • Para 2 puertasde hasta 113,3 kg cada una y de 2,5 cm
à 4,4 cm de grosor
CONTENIDO 2-Puertas
A. Caril 2
B. Portador 4
C. Placa de montaje superior 4
fácilmente desmontable
D. Guía del piso 1
CONTENIDO 2-Puertas
E. Kit espaciador 1
F. #8 x 5/8" Tornillos cabeza plana 39
#310304_A (1012)
Instrucciones para
el ensamblaje
SLIDING DOOR HARDWARE - BY PASS
PREPARE OPENING
1
Hmax = Door Height + 3-3/4" • Hmin = Door Height + 2-13/16"
2-Door Width = 2 x Door Width - 1"
Opening Height
Hauteur Ouverture
Altura Abertura
#310304_A (1012)
Assembly
Instructions
2-7/16" - 3-1/4"
(6,2 cm - 8,3 cm)
Door Height
Hauteur Porte
Altura Puerta
Opening Width
Largeur d’ouverture
Anchura de la abertura
MOUNT FRAME HARDWARE
2
• Center track in opening. Track should
be flush for 1-3/8" doors.
• IMPORTANT: Place hangers loose into
track before securing.
• For 1-3/4" doors, use provided
spacer kit at each end.
• Using track as template, mark
screw locations.
• Drill 3/32" pilot holes and
secure with (#8 x 1-1/2") screws.
Note: If necessary, track may be cut
with a fine tooth saw.
Spacer for
1-3/4" doors
Spacer for
1-3/4" doors
3/8" - 1/2”
(1 cm - 1,3)
MOUNT DOOR HARDWARE
3
• Place quick release top mount
plate on top of each door at the
distance shown from the
outside edge.
• Using brackets as a template,
drill 3/32" diameter holes and
secure with (#8 x 1-1/2") screws.
• Mount pulls (not included).
1-1/2"
(3,8 cm)
Loading...