Knape&Vogt BYP-150A User Manual [en, fr, es]
SLIDING DOOR HARDWARE - BY PASS
BYP-125A & BYP-150A • For 2 doors up to 125 lbs. (plastic wheel) & 150 lbs.
(ball bearing wheels) each with thickness of 1-3/8” to 1-3/4"
Tools Required • Outils requis • Herramientas requeridos
Wrench (included) • Clé (incluse) • Llave (incluida)
Drill (3/32", 3/16", 3/8") • Perceuse (3/32", 3/16", 3/8") • Taladro (3/32", 3/16", 3/8")
Phillips Screw Driver • Tournevis Phillips • Destornillador Phillips
Fine Tooth Saw (optional) • Scie à dents nes (optionnelle) • Sierra de dientes nos (opcional)
CONTENTS 2-Door
A. Track 2
B. Carrier 4
C. Quick Release Top Mount Plate 4
D. Door Guide 1
E. Spacer Kit 1
F. #8 x 3/4" Pan Head Screw 2
G. #8 x 1-1/2" Pan Head Screw 3
H. #8 x 1" Pan Head Screw 24
I. Door Stop 1
B.
D.
E.
#310303_A (1012)
Assembly
Instructions
C.
F.
I.
A.
H.
G.
QUINCAILLERIE POUR PORTE COULISSANTE – BY PASS
BYP-125A & BYP-150A • Pour 2 à 3 portes jusqu'à 56,7 kg (Roue en plastique)
y 68 kg (Roues à roulement à billes) chacune d'une épasseur de 3,5 cm à 4,4 cm
CONTENU 2-Portes
A. Coulisse 2
B. Rouleaux décalés 4
C. Plaque de montage supérieure 4
à dégagement rapide
D. Guide de porte 1
E. Espaceur 1
CONTENU 2-Portes
F. #8 x 3/4" Vis tête cylindrique 2
G. #8 x 1-1/2" Vis tête cylindrique 3
H. #8 x 1" Vis tête cylindrique 24
I. Butoir 1
HERRAJE PARA PUERTA CORREDIZA - TIPO BY PASS
BYP-125A & BYP-150A • Para 2 o 3 puertasde hasta 56,7 kg (rueda plástica)
y 60 kg (rueda doble) cada una y de 3,5 cm à 4,4 cm de grosor
CONTENIDO 2-Puertas
A. Caril 2
B. Portador 4
C. Placa de montaje superior 4
fácilmente desmontable
D. Guía del piso 2
E. Kit espaciador 1
CONTENIDO 2-Puertas
F. #8 x 3/4" Tornillos cabeza plana 2
G. #8 x 1-1/2" Tornillos cabeza plana 3
H. #8 x 1" Tornillos cabeza plana 24
I. Tope de la puerta 1
Instrucciones para
#310303_A (1012)
Instructions
d’assemblage
#310303_A (1012)
el ensamblaje
SLIDING DOOR HARDWARE - BY PASS
PREPARE OPENING
1
Hmax = Door Height + 3-3/16" • Hmin = Door Height + 2-7/16"
#310303_A (1012)
Assembly
Instructions
2-1/16" - 2-11/16"
(5,2 cm - 6,8 cm)
2-Door Width = 2 x Door Width - 1"
Opening Width
Largeur d’ouverture
Anchura de la abertura
MOUNT FRAME HARDWARE
2
• Center track in opening. Track
should be flush for 1-3/8" doors.
• IMPORTANT: Place hangers loose
into track before securing.
• For 1-3/4" doors, use provided
spacer kit at each end.
• Using track as template, mark
screw locations.
• Drill 3/32" pilot holes and
secure with (#8 x 1") screws.
Spacer for
1-3/4" doors
Opening Height
Hauteur Ouverture
Altura Abertura
Spacer for
1-3/4" doors
Door Height
Hauteur Porte
Altura Puerta
3/8" - 1/2”
(1 cm - 1,3 cm)
Note: If necessary, track may be cut
with a fine tooth saw.
MOUNT DOOR HARDWARE
3
• Place quick release top mount
plates on top of each door at
the distance shown from the
outside edge.
• Using brackets as a template,
drill 3/32" diameter holes and
secure with (#8 x 1") screws.
• Mount pulls (not included).
1-1/2"
(3,8 cm)
Loading...