KMT System EA1301 User Manual

Flex

Automatic
Car Mount

EA1301

Non-Slip Pad &
Fast Wireless
Charging

Touch Sensor for

Releasing the Arms

IR Sensor for

Auto Hold / Release

141, Gangseo-ro 56ga-gil, Gangseo -gu, Seoul,
Republi c of Korea (07582)

www.myfreedy.com

2018 Freedy. KMT SYSTEM Co.,Ltd.All rights reserved

Made in China

Motor Powered
Arms

Safety Information

- Please read these information prior to using the device
to ensure safe and proper use.

- Recommended to use only with the cable or power
adaptor provided together along with the device in this
package. Using cables or power adaptors from being
damaged may cause unexpected malfunctions.

- Any magnetic or metallic object may generates heat
and cause unexpected malfunctions.

- Do not disassemble, modify, or attempt to replace
any part of the wireless charger.

- Do not use the device in circumstances with high tem­perature, sunlight or any other type of heat

- This product is intended for the use in a car only.

- Keep away from any harmful liquid or water.

- Unplug the power cable from the power source if you
experience any unexpected problem or visible defects
while using the device, and contact Freedy for assis­tance.

사용 전 주의사항

- 안전하고 올바른 사용을 위해 제품 사용 전 안내를 반드시 읽어주
시기 바랍니다.

- 본 패키지에 포함된 케이블 또는 전원어댑터 사용을 권장합니다.
기타 다른 케이블 또는 전원어댑터 사용시 고장의 원인이 될 수 있
습니다.

- 자성이 있거나 금속재질의 물체가 제품에 올려질 경우에 발열 또는
다른 예상치 못한 문제가 발생할 수 있습니다.

- 제품의 분해, 개조, 변형을 하지 마십시오.

- 고온, 직사광선, 또는 기타 열이 많은 환경에서는 사용하지 마십시오.

- 본 제품은 가정 또는 사무실 등 실내에서 사용하도록 설계되어 있

습니다.

- 유독 화학물질 또는 수분에 노출된 환경에서는 사용하지 마십시오.

- 만약 예상하지 못한 사용상 문제나 결함이 발견되었을 때에는 즉

시 전원 케이블을 분리하여 작동을 멈추고 고객센터에 문의하시기
바랍니다.

Warranty

- Freedy sells its products with the intent that they are
free of defects in manufacture and workmanship for
two year from the date of original purchase. Please keep
a purchase receipt as proof of purchase.

- Freedy warrants that its product will be free of defects
in material and workmanship under normal use and
service.

- This warranty does not cover any damage caused by
misuse or abuse; accident; alternation to the product;
Improper installation; unauthorized repairs or modica­tions; Improper use of wall adaptor; or any other condi­tions whatsoever that are beyond the control of Freedy.

- This warranty does not extend to the purchase of
opened, used, repaired, repackaged and/or resealed
products, including but not limited to sale of such prod­ucts on any online shop and/or sales of such products
by surplus or bulk resellers. Any and all warranties or
guarantees shall immediately cease and terminate if the

product has been modied or altered by anyone except

for Freedy.

제품 보증

- Freedy는 2년간의 제품보증 정책을 제공합니다. 구매확인을 위한
구매영수증을 보관하여 주십시오.

-

제품보증은 제품 오용, 임의 변형, 임의 수리 또는 수정, 부적절한 파
워 어댑터의 사용, 혹은 어떠한 다른 형태의 사용으로 인한 불량 발생
시 적용되지 않습니다.

- 제품보증은 허가받지 않은 판매자로부터 판매된 중고, 수정품, 재
포장 제품 등에는 적용되지 않습니다. Freedy를 제외한 다른 누군
가로부터 이루어진 제품의 변형, 수정 등이 확인될 경우 제품보증이
제공되지 않습니다.

How to use

Pinch Clip to Open

LED Indication

Charging : Red

Not working : Red ashing

Insert Vent ClipPinch Clip to Open

Insert Vent Clip

Specification

Input 5V/ 2A, 9V/1.5 A
Charging Distance 3mm
Frequency 110~205 kHz
Size 104х64х55mm
Weight 88g

Notice

- QC 2.0 or higher power adaptors will be required for
fast wireless charging. (Sold separately) Any power
adaptor lower than 5V/1.8A only activates normal speed
of wireless charging.

- Please make sure the product is properly connected to
the power before using.

- Please do not place any metallic or magnetic object on
the charging area of the product. It may cause serious
malfunctions.

사용 시 주의사항

- 고속무선충전을 위해서는 QC 2.0 또는 그 이상의 전원 어댑터가
필요합니다. (별도 판매) 5V / 1.8A 미만의 전원어댑터는 5W 일반
무선충전만 지원합니다.

- 사용 전 전원연결이 잘 되어 있는지 확인해 주시기 바랍니다.

- 금속재질 또는 자성이 있는 물체를 충전영역 위에 놓지 마십시오. 오
작동의 원인이 될 수 있습니다.

FCC Statement

We, Freedy, declare under our sole responsibility that
this product complies with Part 15 of the FCC Rules.
Operation is subject to the following conditions: (1) this
device may not cause harmful interference, and (2) this
device must accept any interference received including
interference that may cause undesired operation. This
equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to pro­vide reasonable protection against harmful interference
in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions,
may cause harmful interference to radio communica­tions. However, there is no guarantee that interference
will not occur in a particular installation. If this equip­ment does cause harmful interference to radio or tel­evision reception, which can be determined by turning
off and on, the user is encouraged to try to correct the
interference by one or more of the following measures;

- Reorient or relocate the receiving antenna

- Increase the separation between the equipment and
receiver.

- Connect the equipment into an outlet on a circuit differ­ent from that to which the receiver is connected.

- Consult the dealer or an experienced radio / TV tech­nician for help.

Any changes or modications not expressly approved

by the party responsible for compliance could void the
user’s authority to operate this equipment.

Customer Service

http://www.myfreedy.com
Telephone : [phone]