KMC Controls STE-9000 Series Quick Reference Manual
PM
Control Buttons
Up
Enter
Quick Reference Guide
STE-9000 Series Digital Room Sensors
Current Temperature
Occupancy Mode
Time (and Optional
CO2 or Humidity)
Down
CONTROL BUTTONS
Press the Enter button repeatedly to view:
• Cooling Setpoint
• Heating Setpoint
• Mode (Heat, Cool, Auto, Off, or Emergency
Heat)
• Fan (Auto or Constant On)
While viewing a menu item:
• Press the Up or Down button to change the
setting if desired
• Press the Enter button to continue
Opt. Motion Sensor
OCCUPANCY MODE
The icon shows the current mode (according
to the schedule, sensed motion, or button
activation):
• Person in house = Occupied
• Empty house = Standby
• OVR = Override (activated by motion or adjusting setpoint during unoccupied times on
a schedule)
• None of the icons = Unoccupied
(A Level 1 password might be required to
access this menu. If needed, contact the
installer.)
OPTIONS
DESCRIPTION
Not all options, such as motion detection or
emergency heat, may be available with the
particular equipment model and application.
CONFIGURATION
For information about the conguration menus,
see the KMC Conquest Controller Application
Guide.
KMC Conquest™ STE-9000 series NetSensors
are wall-mounted digital space temperature
sensors designed for use with KMC Conquest
BAC-5900/9000/9300 series controllers.
SUPPORT
Additional resources for installation,
conguration, application, operation,
programming, upgrading, and much more are
available on the web at www.kmccontrols.
com. To see all available les, log-in to the KMC
Partners site.
2© 2017 KMC Controls, Inc. Specifications and design are subject to change without notice AG170426A
Loading...