KMC Controls REE-5123 User Manual

Relay Module, Proportional Reheat w/ Thermostat Power Supply

Installation Guide

Mounting

The module may be mounted directly to a control

box surface or in a 2 x 4" electrical handy box. Add a blank cover to conceal the module if desired.

REE-5106/5123

Connections and Wiring

REE-5106

All dimension are in inches (mm)

Wire as shown for providing proportional reheat to an electric hot water valve. Supply the relay with 24 VAC (+20%/–15%) from a Class 2 transformer. (Use wire size of 14 to 22 AWG, stranded.)

Valve Open

Water

Flow

10 2 VDCThermostat

Signal (RA)

Room Temperature

Valve

Closed

NOTE: The REE-5123 (shown on the next page) has

been discontinued.

NOTE: For REE-5106 use with a CTE-5202

thermostat, see the CTE-5202 Applications

Guide on the KMC web site.

REE-5106/5123 1 Installation Guide

Important Notices

The material in this document is for information purposes only. The contents and the product it describes are subject to change without notice. KMC Controls, Inc. makes no representations or warranties with respect to this document. In no event shall KMC Controls, Inc. be liable for any damages, direct or incidental, arising out of or related to the use of this document.

REE-5123

NOTE: The REE-5123 has

been discontinued.

More Information

For REE-5106 specications, see the REE-5106 Data Sheet on the KMC web site.

For REE-5106 applications

with the CTE-5202 thermostat and other information,

see the CTE-5202 Applica-

tions Guide.

Troubleshooting

• Check the wiring.

• Check the voltage from the thermostat/controller (measured from Terminal T to Terminal –/Neutral). (See the voltage charts.)

• See the MEP-3001, relevant valve, and relevant thermostat documentation.

For (discontinued) REE-5123

specications, see the REE-

5123 Data Sheet.

Maintenance

No routine maintenance is required, however protection from extremes of humidity and dirt is recommended. Careful installation will help ensure long-term reliability and performance.

REE-5106/5123 2 Installation Guide

KMC Controls, Inc.

19476 Industrial Drive

New Paris, IN 46553

574.831.5250

www.kmccontrols.com

info@kmccontrols.com