KMC Controls REE–4002 User Manual

Installation Guide

Required Tools

• digital voltmeter

• small phillips screwdriver

• small flatblade screwdriver

Mounting

• The REE–4002 may be mounted directly to a

control box surface or in a 2" x 4" electrical handy
box.

• Add a blank cover to conceal the module.

Relay Module Fan Box Control

REE–4002

Wiring

• Supply the unit with 24 VAC, +20%/-15%

• A DC Voltmeter is shown across terminals “X” and
“9“ to measure the fans setpoint for recalibration. The
setpoint is factory calibrated at 3 VDC.

• Check graph for output over a 0–6 VDC.

Maintenance

No routine maintenance is required, however
protection from extremes of humidity and dirt is
recommended.

Careful installation will also ensure long term
reliability and performance.

KMC Controls

P.O. Box 497

19476 Industrial Drive

New Paris, IN 46553

U.S.A.
TEL: [phone]
FAX: [phone]

E-mail: [e-mail]

810-019-02F