KMC Controls REE-2005 User Manual

Installation Guide

Mounting

• The REE-2005 may be mounted directly to a

control box surface or in a 2" x 4" electrical handy
box.

• To conceal the module, add a blank cover.

Voltage to Current Converter Module

REE-2005

Connections and Wiring

• Wire the module as illustrated.

• Supply the unit with either 24 VAC or 22–40
VDC. (See the note about maximum receiver
loads for AC vs. DC power.)

• See the graph for output over a 0–10 VDC input
range.

Maintenance

No routine maintenance is required. Each compo­nent is designed for dependable, long-term reliabil­ity, and performance. Careful installation will also
ensure long-term reliability and performance.

*NOTE: If the unit is powered by 24 VAC, the

maximum receiver load is 650 ohms.

If the unit is powered by 22 to 40 VDC,
the maximum receiver load in ohms is

determined by the formula:

(VDC – 13.1)

0.0184

KMC Controls, Inc.

19476 Industrial Drive, PO Box 497

New Paris, IN 46553

574.831.5250

www.kmccontrols.com; [e-mail]

© 2011 KMC Controls, Inc. 884-019-01G