KMart 43007653 Users manual

Item No.: 43007653
Item Name: 40CM MOTO CROSS BIKE

8.

V

List of Hardware

Grip

Brake Lever

Chain Guard

Rear Hub

Seat Post

Training Wheel

saddle

Chain

Crank

Handle Bar

Down Tube

Chain Wheel

Pedal

Cable Housing

Front Hub

Stem

Fork

Front Brake

Rim

Tyre

V1

LIST OF HARDWARE

LIST OF HARDWARE

M5 x 8mm (A x 2)

M5 x 8mm (B x 1)

M6 x 20mm (C x 1)

M5 x 12mm (D x 4)

BRACKET (M x 2) NUMBER PLATE

CAUTION:

CHECK THE LIST OF HARDWARE BEFORE ASSEMBLY.
PAY ATTENTION TO THE LENGTH OF SCREWS AND BOLTS.

M6 x 42mm (E x 2)

M6 x 14mm (F x 1)

M6 x 15mm (G x 1)

M5 x 12mm (H x 1)

(N x 1)

φ5mm WASHER (I x 4 ）

φ5mm Nut (J x 4）

φ6mm WASHER (K x 7)

φ6mm Nut (L x 4）

FRONT FENDER

(O x 1)

1

item

bicycle

5

6” (15cm)

Tools required(Not included in the packing)

Phillips head screwdriver;

adjustable wrench or an 8mm, 10mm, 13mm,14mm

15mm open and box end wrenches;Allen Keys;
A plier with cable cutting ability˗Air pump；

It is recommended that a torque wrench is used when
assembling the bike.

Keep a Record of Your Bicycle

Each bicyle has a Serial Number stamped into the bottom of the frame. Write down this number to keep it for future reference.Take

a colour photograph of your bicycle, write the Serial number on the back of the photograph and keep it in a safe place. If you keep

a record of the details of your bicycle it will greatly increase the possibility of getting it back should it be lost or stolen.

Remember the advice about LOCKING YOUR BICYCLE. A good quality lock is cheap insurance.

Tighten them so they do not move and are horizontal. Check the handlebar is in good condition and the ends of the
handlebar are plugged. Check the bell is fitted and working well.

Warning: Handlebar grips and tube end plugs should be replaced if damaged, as bare ends have been know to cause injury.

Please check the condition of grips and bar ends before riding.