Klutch Multi-function Tool, 343901 Owner's Manual

Multi-Function

Tool

OWNER'S MANUAL

Read carefully and understand all INSTRUCTIONS before

operating. Failure to follow the safety rules and other basic

safety precautions may result in serious personal injury.

WARNING:

Item # 343901

0210

Thank you very much for choosing a KlutchTMproduct! For future reference, please complete
the owner's record below:

Model: _______________ Purchase Date: _______________

Save the receipt, warranty and these instructions. It is important that you read the entire
manual to become familiar with this product before you begin using it.

This machine is designed for certain applications only. The distributor cannot be responsible
for issues arising from modification. We strongly recommend this machine is not modified
and/or used for any application other than that for which it was designed. If you have any
questions relative to a particular application, do not use the machine until you have first
contacted the distributor to determine if it can or should be performed on the product.

For technical questions please call 1-800-222-5381.

INTENDED USE

This Multi-Function Tool is intended for sawing, sanding, polishing and cutting.

TECHNICAL SPECIFICATIONS

Description Specifications

Motor: 120V ~ 60Hz, 2 Amps

No load speed: 1000 - 21000 RPM

Packed weight: 2.6 lbs

UNPACKING

When unpacking the tool, please check if any parts are missing or broken. Please call Product Support at 1­800-222-5381.

. . . . .

Qty

1

1
1

2

Description

. . . . . . . .

ool

Multifunction

Allen key . . . . . . . . . . . . . . .1

Straight saw blade
Bending shoval blade

Half circular saw blade . . . .1

riangle sand disc . . . . . . .1

T
Sanding paper

T

. . . . . . .

. . . . . . . . . .

GENERAL SAFETY RULES

ARNING!

W

in electric shock, fire and/or serious injury

WARNING! The warnings, cautions, and instructions discussed in this instruction manual cannot
cover all possible conditions or situations that could occur
that common sense and caution are factors which cannot be built into this product, but must be
supplied by the operator

Read and understand all instructions.

.

.

Failure to follow all instructions listed

. It must be understood by the operator

below may result

1

VE THESE INSTRUCTIONS

SA

WORK AREA

• Keep work area clean,

free of clutter and well lit. Cluttered and dark work areas can cause accidents.

• Do not use your tool where there is a risk of causing a fire or an explosion; e.g. in the presence of
flammable liquids, gasses, or dust. Power tools create sparks, which may ignite the dust or fumes.

• Keep children and bystanders away while operating a power tool. Distractions can cause you to lose
control, so visitors should remain at a safe distance from the work area.

• Be aware of all power lines, electrical circuits, water pipes and other mechanical hazards in your work
area, particularly those hazards below the work surface hidden from the operator's view that may be
unintentionally contacted and may cause personal harm or property damage.

• Be alert of your surroundings. Using power tools in confined work areas may put you dangerously close to
cutting tools and rotating parts.

ELECTRICAL SAFETY

WARNING! Always check to ensure the power supply corresponds to the voltage on the rating plate.

• Do not abuse the cord. Never carry a portable tool by its power cord, or yank tool or extension cords from

the receptacle. Keep power and extension cords away from heat, oil, sharp edges or moving parts. Replace
damaged cords immediately. Damaged cords may cause a fire and increase the risk of electric shock.

• Grounded tools must be plugged into an outlet properly installed and grounded in accordance with all codes
and ordinances. Never remove the grounding prong or modify the plug in any way. Do not use any adapter
plugs. Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded.

• Double insulated tools are equipped with a polarized plug (one blade is wider than the other). This plug will
fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still doesn't
fit, contact a qualified electrician to install a polarized outlet. Do not change the plug in any way.

• Avoid body contact with grounded surfaces such as pipes, radiators, ranges, and refrigerators. There is an
increased risk of electric shock if your body is grounded.

• When operating a power tool outside, use an outdoor extension cord marked “W-A” or “W.” These cords
are rated for outdoor use and reduce the risk of electric shock.

• Extension Cord Use:

A. Use only 'Listed' extension cords. If used outdoors, they must be marked “For Outdoor Use.” Those

cords having 3-prong grounding type plugs and mating receptacles are to be used with grounded tools.

B. Replace damaged or worn cords immediately.

C. Check the name plate rating of your tool. Use of improper size or gauge of extension cord may cause

unsafe or inefficient operation of your tool. Be sure your extension cord is rated to allow sufficient current
flow to the motor. For the proper wire gauge for your tool, see chart.

CHART FOR MINIMUM WIRE SIZE OF EXTENSION CORD:

If in doubt, use larger cord. Be sure to check voltage requirements of the tool to your incoming power source.

• Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of
electric shock.

• Do not let your fingers touch the terminals of plug when installing to or removing from the outlet.

• Ground fault circuit interrupters. If work area is not equipped with a permanently installed Ground Fault

Circuit Interrupter outlet (GFCI), use a plug-in GFCI between power tool or extension cord and power receptacle.

2