Klutch 20244 Owner's Manual

ULTIMATE CAR POLISHING KIT

OWNER’S MANUAL

WARNING:

Read carefully and understand all ASSEMBLY AND OPERATION
INSTRUCTIONS before operating. Failure to follow the safety rules and other

basic safety precautions may result in serious personal injury.

It em # 20244

Page of 10

2

Thank you very much for choosing a Klutch product! For future reference, please complete the

owner’s record below:

Model: _______________ Purchase Date: _______________

Save the receipt, warranty and these instructions. It is important that you read the entire manual to

become familiar with this product before you begin using it.

This machine is designed for certain applications only. The distributor cannot be responsible for
issues arising from modification. We strongly recommend this machine not be modified and/or used
for any application other than that for which it was designed. If you have any questions relative to a
particular application, DO NOT use the machine until you have first contacted the distributor to
determine if it can or should be performed on the product.

For technical questions please call 1-800-222-5381.

INTENDED USE:

The Klutch Ultimate Car Polishing Kit is used to smooth wood and metal finishes, prepare a variety

Of surfaces for painting or refinishing, or polishing metal surfaces with included pad.

TECHNICAL SPECIFICATIONS:

Input: 120V AC, 11.0Amp
No-Load Speed: 600-3,000 RPM
Disc Capacity: 7 in.
Net Weight: 7.5 lbs.

GENERAL SAFETY RULES

WARNING: Read and understand all instructions. Failure to follow all instructions listed

below may result in serious injury.

CAUTION: Do not allow persons to operate or assemble this Car Polisher until they

have read this manual and have developed a thorough understanding of how the Car
Polisher works.

WARNING: The warnings, cautions, and instructions discussed in this instruction

manual cannot cover all possible conditions or situations that could occur. It must be

understood by the operator that common sense and caution are factors which cannot be built into

this product, but must be supplied by the operator.

SAVE THESE INSTRUCTIONS

Page of 10

3

USE AND CARE

• Do not modify the Car Polisher in any way. Unauthorized modification may impair the

function and/or safety and could affect the life of the equipment. There are specific

applications for which the Car Polisher was designed.

• Always check of damaged or worn out parts before using the Car Polisher. Broken

parts will affect the Car Polisher operation. Replace or repair damaged or worn parts

immediately.

• Store idle Car Polisher. When Car Polisher is not in use, store it in a secure place out of

the reach of children. Inspect it for good working condition prior to storage and before reuse.

• DO NOT let comfort or familiarity with product (gained from repeated use) replace

strict adherence to sander/polisher safety rules. If you use this tool unsafely or

incorrectly, you can suffer serious personal injury.

1. Use only accessories rated for at least the maximum speed as displayed on the tool’s

nameplate. Backing pads, discs, and other accessories running at speeds greater than

their rated maximum speed may fly apart and cause serious personal injury.

2. Check the backing pad for cracks, damage or deformity before operation. Immediately

replace cracked, damaged, or deformed pads.

3. Never use this tool with wood cutting blades or other saw blades. Using such blades on

the sander/polisher frequently kick back, causing loss of tool control and resulting in

personal injury.

4. Hold the tool firmly using the rear handle and front mounted auxiliary handle.

5. Keep hands away from rotating parts.

6. Before starting the tool make sure the sanding disc or polishing bonnet is not contacting

the work piece.

7. Check that the work piece is properly supported and secured in place.

8. After switching off the tool, the wheel will continue to rotate. Do not release your grip on

the tool until the wheel comes to a complete stop.

9. Operate the tool only when it is hand held.

10. This tool is not waterproofed; do not use water on the work piece surface.

11. Adequately ventilate your work area when performing sanding operations.

12. Using this tool to sand some products, paints and woods may expose the user to dust

containing hazardous substances. Use adequate and appropriate respiratory protection.

ASSEMBLY

CAUTION: Always be sure the tool is switched off and unplugged before assembling

parts, making adjustments, assembling or replacing sanding discs or bonnets, or checking

function on the tool.

AUXILARY HANDLE: Always be sure the auxiliary handle is installed securely before operating the

tool.