Klutch 19982 Owner's Manual

1 OF 7

6 in. CENTRAL VACUUM RANDOM

ORBITA L S A N D E R

OWNER’S MANUAL

WARNING: Read carefully and understand all

INSTRUCTIONS before operating. Failure to follow the safety
rules and other basic safety precautions may result in serious
personal injury.

Ite m #19982

2 OF 7

Thank you very much for choosing a Klutch™ product! For future reference, please complete the

owner’s record below:

Model: _______________ Purchase Date: _______________

Save the receipt, warranty and these instructions. It is important that you read the entire manual to

become familiar with this product before you begin using it.

This machine is designed for certain applications only. The distributor cannot be responsible for issues
arising from modification. We strongly recommend this machine is not modified and/or used for any
application other than that for which it was designed. If you have any questions relative to a particular
application, DO NOT use the machine until you have first contacted the distributor to determine if it can
or should be performed on the product.

For technical questions please call 1-800-222-5381.

INTENDED USE

This 6in. Central Vacuum Random Orbital Sander provides effortless power and enough speed to

complete a variety of drilling applications. Its right-angle head is ideal for use in tight quarters, providing

better efficiency and productivity. This tool stops rotation within few seconds after releasing the lever.

Reduced noise level and lightweight construction allow you to work longer with less fatigue.

TECHNICAL SPECIFICATIONS

Item

Description

Noise Level

80 dBA

Speed

11,000 RPM Free Speed

Sanding Pad

6in.

Random Orbit

5mm

5-blade rotor produces more useful power using less air.

Anti-dust system insulates motor and bearings from residue.

GENERAL SAFETY RULES

WARNING: Read and understand all instructions. Failure to follow all instructions listed below

may result in electric shock, fire and/or serious injury.

WARNING: The warnings, cautions, and instructions discussed in this instruction manual

cannot cover all possible conditions or situations that could occur. It must be understood by the

operator that common sense and caution are factors, which cannot be built into this product, but must be

supplied by the operator.

3 OF 7

SAVE THESE INSTRUCTIONS

WORK AREA

• Keep work area clean, free of clutter and well lit. Cluttered and dark work areas can cause

accidents.

• Do not use your Central Vacuum Random Orbital Sander where there is a risk of causing a

fire or an explosion; e.g. in the presence of flammable liquids, gasses, or dust. An Central

Vacuum Random Orbital Sander can create sparks, which may ignite the dust or fumes.

• Keep children and bystanders away while operating the Central Vacuum Random Orbital Sander.

Distractions can cause you to lose control, so visitors should remain at a safe distance from the

work area.

• Be aware of all power lines, electrical circuits, water pipes and other mechanical hazards in

your work area, particularly those hazards below the work surface hidden from the operator’s view

that may be unintentionally contacted and may cause personal harm or property damage.

• Be alert of your surroundings. Using the Central Vacuum Random Orbital Sander in confined

work areas may put you dangerously close to cutting tools and rotating parts.

PERSONAL SAFETY

• Stay alert, watch what you are doing and use common sense when operating the Central Vacuum

Random Orbital Sander. Do not use the Central Vacuum Random Orbital Sander while you are tired

or under the influence of drugs, alcohol or medication. A moment of inattention while operating the

Central Vacuum Random Orbital Sander may result in serious personal injury.

• Dress properly. Do not wear loose clothing, dangling objects, or jewelry. Keep your hair, clothing

and gloves away from moving parts. Loose clothes, jewelry or long hair can be caught in moving

parts. Air vents often cover moving parts and should be avoided.

• Use safety apparel and equipment. Use ANSI-approved safety goggles or safety glasses with

side shields, or when needed, a face shield. Use as dust mask in dusty work conditions. This

applies to all persons in the work area. Also use non-skid safety shoes, hardhat, gloves, dust

collection systems, and hearing protection when appropriate.

• Do not overreach. Keep proper footing and balance at all times.

• Remove adjusting keys or wrenches before connecting to the power supply or turning on the tool.

A wrench or key that is left attached to a rotating part of the tool may result in personal injury.

PNEUMATIC TOOL USE AND CARE

• Do not force the tool. Pneumatic tools do a better and safer job when used in the manner for

which they are designed. Plan your work, and use the correct tool for the job.

• Never use a tool with a malfunctioning switch. Any power tool that cannot be controlled with the

switch is dangerous and must be repaired by an authorized service representative before using.

• Disconnect air supply from tool and place the switch in the locked or off position before making

any adjustments, changing accessories, or storing power tools. Such preventive safety measures

reduce the risk of starting the power tool accidentally.