Klutch 171468 Owner's Manual

1 OF 7

Composite Pistol-Type Air N e e d l e

Scale r

OWNER’S MANUAL

WARNING: Read carefully and understand all

INSTRUCTIONS before operating. Failure to follow the safety rules
and other basic safety precautions may result in serious personal
injury.

Item #171468

2 OF 7

Thank you very much for choosing a Klutch™ product! For future reference, please complete the owner’s

record below:

Model: _______________ Purchase Date: _______________

Save the receipt, warranty and these instructions. It is important that you read the entire manual to

become familiar with this product before you begin using it.

This machine is designed for certain applications only. The distributor cannot be responsible for issues
arising from modification. We strongly recommend this machine not be modified and/or used for any
application other than that for which it was designed. If you have any questions relative to a particular
application, DO NOT use the machine until you have first contacted the distributor to determine if it can
or should be performed on the product.

For technical questions please call 1-800-222-5381.

INTENDED USE

This Composite Pistol-Type Air Needle Scaler sands and smoothes cylindrical objects and remove spurs

for smoothness and optimum surface contact.

TECHNICAL SPECIFICATIONS

Item

Description

Includes

19 needles

Blows per minute

4000

Air Consumption

11 CFM

Inlet Size

1/4in.

Hose Size

3/8in.

GENERAL SAFETY RULES

WARNING: Read and understand all instructions. Failure to follow all instructions listed below

may result in electric shock, fire and/or serious injury.

WARNING: The warnings, cautions, and instructions discussed in this instruction manual

cannot cover all possible conditions or situations that could occur. It must be understood by the

operator that common sense and caution are factors, which cannot be built into this product, but must be

supplied by the operator.

SAVE THESE INSTRUCTIONS

3 OF 7

WORK AREA

· Keep work area clean, free of clutter and well lit. Cluttered and dark work areas can cause accidents.

· Do not use your Air Scaler where there is a risk of causing a fire or an explosion; e.g. in the

presence of flammable liquids, gasses, or dust. An Air Scaler can create sparks, which may ignite the

dust or fumes.

· Keep children and bystanders away while operating the Air Scaler. Distractions can cause you to

lose control, so visitors should remain at a safe distance from the work area.

· Be aware of all power lines, electrical circuits, water pipes and other mechanical hazards in your

work area, particularly those hazards below the work surface hidden from the operator’s view that may

be unintentionally contacted and may cause personal harm or property damage.

· Be alert of your surroundings. Using the Air Scaler in confined work areas may put you dangerously

close to cutting tools and rotating parts.

PERSONAL SAFETY

· Stay alert, watch what you are doing and use common sense when operating the Air Scaler. Do not

use the Air Scaler while you are tired or under the influence of drugs, alcohol or medication. A moment

of inattention while operating the Air Scaler may result in serious personal injury.

· Dress properly. Do not wear loose clothing, dangling objects, or jewelry. Keep your hair, clothing and

gloves away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts. Air

vents often cover moving parts and should be avoided.

· Use safety apparel and equipment. Use ANSI-approved safety goggles or safety glasses with side

shields, or when needed, a face shield. Use as dust mask in dusty work conditions. This applies to all

persons in the work area. Also use non-skid safety shoes, hardhat, gloves, dust collection systems,

and hearing protection when appropriate.

· Do not overreach. Keep proper footing and balance at all times.

· Remove adjusting keys or wrenches before connecting to the power supply or turning on the tool. A

wrench or key that is left attached to a rotating part of the tool may result in personal injury.

PNEUMATIC TOOL USE AND CARE

· Do not force the tool. Pneumatic tools do a better and safer job when used in the manner for which

they are designed. Plan your work, and use the correct tool for the job.

· Never use a tool with a malfunctioning switch. Any power tool that cannot be controlled with the switch

is dangerous and must be repaired by an authorized service representative before using.

· Disconnect air supply from tool and place the switch in the locked or off position before making any

adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce

the risk of starting the power tool accidentally.

· Secure work with clamps or a vise instead of your hand to hold work when practical. This safety

precaution allows for proper tool operation using both hands.