Klutch 100801 Owner's Manual

1 OF 7

2-IN-1 ANGLE GRINDER/CUTOFF TOOL

OWNER’S MANUAL

WARNING: Read carefully and understand all

INSTRUCTIONS before operating. Failure to follow the safety
rules and other basic safety precautions may result in serious
personal injury.

It e m # 10 0 80 1

2 OF 7

Thank you very much for choosing a NORTHERN TOOL + EQUIPMENT CO., INC. Product! For future

reference, please complete the owner’s record below:

Model: _______________ Purchase Date: _______________

Save the receipt, warranty and these instructions. It is important that you read the entire manual to

become familiar with this product before you begin using it.

This machine is designed for certain applications only. Northern Tool + Equipment cannot be
responsible for issues arising from modification. We strongly recommend this machine is not modified
and/or used for any application other than that for which it was designed. If you have any questions
relative to a particular application, DO NOT use the machine until you have first contacted Northern
Tool + Equipment to determine if it can or should be performed on the product.

For technical questions please call 1-800-222-5381.

INTENDED USE

This 2-in-1 Angle Grinder and Cutoff Tool is designed to cut through and smooth various types of metal.

This Angle Grinder and Cutoff Tool does not include a wheel; wheel sold separately.

TECHNICAL SPECIFICATIONS

Item

Description

Disk Size

4in.

Arbor Size

3/8in.

Noise Level

87dB

Cutting Speed

13,000 RPM Free Speed

Air Consumption

3.6 CFM

Inlet Size

1/4in.

Hose Size

3/8in.

GENERAL SAFETY RULES

WARNING: Read and understand all instructions. Failure to follow all instructions listed below

may result in electric shock, fire and/or serious injury.

WARNING: The warnings, cautions, and instructions discussed in this instruction manual

cannot cover all possible conditions or situations that could occur. It must be understood by the

operator that common sense and caution are factors, which cannot be built into this product, but must be

supplied by the operator.

3 OF 7

SAVE THESE INSTRUCTIONS

WORK AREA

· Keep work area clean, free of clutter and well lit. Cluttered and dark work areas can cause accidents.

· Do not use your 2-in-1 Angle Grinder and Cutoff Tool where there is a risk of causing a fire or

an explosion; e.g. in the presence of flammable liquids, gasses, or dust. An 2-in-1 Angle Grinder and

Cutoff Tool can create sparks, which may ignite the dust or fumes.

· Keep children and bystanders away while operating the 2-in-1 Angle Grinder and Cutoff Tool.

Distractions can cause you to lose control, so visitors should remain at a safe distance from the work

area.

· Be aware of all power lines, electrical circuits, water pipes and other mechanical hazards in your

work area, particularly those hazards below the work surface hidden from the operator’s view that may

be unintentionally contacted and may cause personal harm or property damage.

· Be alert of your surroundings. Using the 2-in-1 Angle Grinder and Cutoff Tool in confined work areas

may put you dangerously close to cutting tools and rotating parts.

PERSONAL SAFETY

· Stay alert, watch what you are doing and use common sense when operating the 2-in-1 Angle Grinder

and Cutoff Tool. Do not use the 2-in-1 Angle Grinder and Cutoff Tool while you are tired or under the

influence of drugs, alcohol or medication. A moment of inattention while operating the 2-in-1 Angle

Grinder and Cutoff Tool may result in serious personal injury.

· Dress properly. Do not wear loose clothing, dangling objects, or jewelry. Keep your hair, clothing and

gloves away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts. Air

vents often cover moving parts and should be avoided.

· Use safety apparel and equipment. Use safety goggles or safety glasses with side shields which

comply with current national standards, or when needed, a face shield. Use as dust mask in dusty work

conditions. This applies to all persons in the work area. Also use non-skid safety shoes, hardhat, gloves,

dust collection systems, and hearing protection when appropriate.

· Do not overreach. Keep proper footing and balance at all times.

· Remove adjusting keys or wrenches before connecting to the power supply or turning on the tool. A

wrench or key that is left attached to a rotating part of the tool may result in personal injury.

PNEUMATIC TOOL USE AND CARE

· Do not force the tool. Pneumatic tools do a better and safer job when used in the manner for which

they are designed. Plan your work, and use the correct tool for the job.

· Never use a tool with a malfunctioning switch. Any power tool that cannot be controlled with the switch

is dangerous and must be repaired by an authorized service representative before using.