Congratulations on the purchase of your new KlipXtreme® KSB-220 soundbar
with Bluetooth
English
We invite you to visit us at www.klipxtreme.com for support and to find out
more about this audio system and other new and exciting products.
Main features
35in 2.0 channel sound system with metallic mesh housing, an optical digital
•
interface and Bluetooth
150W of output power with an incredible rich and crystal clear audio through
•
two 3.0-inch drivers and two 0.75in tweeters
Two passive radiators that enhance sound quality to a greater audio level
•
Features an Optical digital input, a USB port and a 3.5mm auxiliary jack to
•
stream music from any of your audio devices
Convenient coaxial cable input to provide audio connection for a TV, DVD
•
player or receiver devices
Convenient remote control
•
®
wireless technology.
®
wireless technology
II. Package content
To get the most of your audio system, please take a few minutes to read the
following instructions and familiarize yourself with the operation of the unit.
Before setting up the device, make sure that the following items are included in
box:
• Soundbar
• Optical digital cable
• 3.5mm auxiliary cable
• Coaxial cable
• Remote control with batteries
• Quick installation guide
Unpack your unit carefully. We recommend that you save the box and all original
packing materials, in case you wish to store the unit, or if you ever need to return
it for service.
(1)
(1)
(1)
(1)
(1)
(1)
III. Product overview
Front and right side panel
1
5. Source button
Press this button briey to toggle among the available
input modes on the soundbar: BT, AUX, OPT, COX.
As soon as a USB device is connected to the soundbar,
the USB indication will be displayed on the LED screen.
In playback mode, press this button to start and pause
media in Bluetooth® and USB modes.
2
5
ControlDescription
1. LED display
2. Power button
3. + button
4. - buttonPress this buton briey to lower the volume in small
It exhibits the input mode, volume level, the track
being played, and the current channel selected.
The white LED BT icon starts blinking fast when the
device has entered into the pairing mode.
Press this button briey to turn the soundbar
ON/OFF-Standby.
Press this button briey to increase the volume in small
increments. Press and hold this button to increase the
volume constantly to the desired level.
increments. Press and hold this button to lower the
volume constantly to the desired level.
3
4
Back panel
ConnectorsDescription
6. AC power cord
7. Optical digital port
8. Coaxial port
9. Auxiliary input
10. USB port
10 9 8
Insert the power cord plug in an AC outlet to provide
power to your device (110-240V 50 60HZ/300mA).
Provides the audio connection for a high denition TV,
DVD player, game console, a cable box or other
compatible devices.
Provides audio connection for a TV, DVD player or receiver.
It enables audio playback from devices tted with a
3.5mm connector, such as computers, TV sets, MP3,
DVD players, etc.
Insert a compatible storage device to play music les
in this port.
7
6
Remote control
In addition to the right-side panel buttons, an infrared remote control is included
which provides additional functions to allow greater control over the media
player.
1. Install the supplied batteries in the remote control following the correct
polarity as indicated inside the compartment.
2. In order for the remote to operate properly, ensure that it is pointed toward
the front of the soundbar.
1
2
5
6
7
10
3
4
8
9
ButtonsDescription
1. Power button
2. Vol. +/ Vol - button
3. button
4. Play/Pause
and Mute button
5. BT button
6. USB button
7. Opt button
8. Aux in button
9. COX button
1. EQ button
Press this button briey to turn the soundbar
ON/OFF-Standby.
Press these butons briey to increase or lower the
volume coming from the soundbar.
In USB or BT mode, press any of these buttons to
select the previous or next track on your play list.
Press this button briey to start and pause media.
Press this button to mute or unmute the soundbar.
This feature is only available in BT mode.
Press this button briey to turn on the Bluetooth®
function and starts pairing the soundbar. Press and
hold this button to go back into pairing mode.
Press this button briey to switch to the USB mode
and play audio stored in a USB ash drive.
Press this button briey to switch to the optical digital
mode to play audio coming from a device connected
to the optical digital port.
Press this button briey to select the source device
connected to the 3.5mm input jack
Use this button to activate the audio connection for
a TV, DVD player or receiver.
Press this button briey to switch among the available
equalizer sound eects: EQ 1: Cine, EQ 2: Song,
EQ3: dlA.
1. Insert one end of the supplied coaxial or optical digital cable into the matching
input jack on the back of the soundbar and the other end on the device you wish
to play audio from.
2. For wired playback, connect one end of the supplied auxiliary cable to the
corresponding port on the soundbar and the other end to audio devices fitted
with a 3.5mm jack.
3. Likewise, if you want to play music directly from a flash drive, simply insert your
storage device into the USB port on the right side of the unit.
4. Plug the AC cable into a wall outlet.
5. Turn on the soundbar by pressing the Power button on the main unit. You can
also press the red Power button on the remote control.
6. Select the input mode by pressing the button corresponding to the source you
want to play audio from, located on the remote control.
7. Using the controls on the remote, you can manage and select your tracks,
increase or lower the volume, mute the soundbar audio, etc.
Note: For digital audio (coaxial and optical connection) the setting in the source
device has to be changed to PCM audio format.
V. Advanced operation IV. USB, Auxiliary, Coaxial and Optical digital connections
Pairing the soundbar with your Bluetooth® device
Note: Before installing this product, please make sure your device is compatible
with Bluetooth
1. First switch the system on from the standby mode using the Power button
found on the right side of the unit or on the remote control, if you haven’t done
so already. The BT indication will appear on the display.
2. Place both devices not more than one meter away from each other.
3. Enable the Bluetooth
wireless soundbar.
4. Select the Bluetooth
the BT icon starts blinking to indicate that the system has entered into the pairing
mode.
5. Once the soundbar appears listed under the newly found Bluetooth
(KSB-220), the pairing process will start.
6. If pairing is successful, another short beep will be heard, and the BT icon will
stop blinking.
7. If after 60 seconds the pairing process fails, please repeat steps 1 through 6
described above.
®
.
®
function on your audio device and set it to discover the
®
mode on the soundbar. A short beep will be heard, and
®
devices
Loading...
+ 10 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.