KlipXtreme KHS-705 User Manual
TwinBuds II
KHS-705
I. Introduction
Thank you for purchasing the Klip Xtreme
KHS-705 True Wireless Stereo earphones
with Bluetooth
English
them with mobile audio devices also enabled
with this technology, the earphones oer great
audio quality, excellent performance and the
freedom of listening to music or taking calls
easily everywhere you go.
We encourage you to thoroughly read this
quick installation guide to get the most out of
this innovative and truly portable wireless audio
device.
®
wireless technology. By pairing
Main features
• True Wireless Stereo (TWS) earphones
• Built-in HD microphone for taking calls
• Supports single (mono) and dual earphone
use (stereo)
• The magnetic charging dock is equipped with
a 330mAh battery capable of providing
enough energy to last up to 2 recharge cycles
of up to 7 hours each
• Each earphone is equipped with a 50mAh
lithium battery
• Up to 21 hours of total playback time and
approximately 120 hours in standby mode
• The charging dock can fully charge earbuds in
about 1.5 hours
• Includes two extra sets of ear tips for a
comfortable, custom fit
Package content
• Wireless earphone
• Magnetic charging case
• Micro USB charging cable
• Set of silicone tips (1 medium, 1 large)
• User Manual
(2)
(1)
(1)
(2)
(1)
2. Product overview
Back view
3
41 2
8
9
75 6
1 Magnetic charging socket: Place each
earphone in the corresponding left and right
side to recharge.
2 On/Off button: Press this button once to
turn the case on to charge the earphones.
Press and hold this button for about two
seconds to turn it o.
3 Charging case LED indicator: The LEDs
will blink consecutively in white indicating that
the device is being charged. Once the fourth
LED indicator is solid white, they will stop
blinking and stay solid to indicate that it is fully
charged.
4 Charging port: Insert the micro-USB cable
in this jack.
5 Silicone ear fins: Adjust them correctly into
your outer ear for a secure fit.
6 Built-in microphone: Picks up your voice to
enable hands-free calling and conferencing.
Earphones LED indicator: The LED turns
solid red when the case is turned on and
charging the earphones. Once the earphones
are fully charged the red light will turn blue,
after about 1 minute the light will turn o and
it will stop charging.
7 Power/Multifunction button: Press the
multifunction button to power the earphones
on and o. Press this button also to start and
pause media, and to answer or end an
incoming call.
8 Earphone magnetic contacts: Place the
left and right earphones properly in the
charging case to start receiving charge.
9 Sets of silicone tips (medium and large
size): Interchangeable silicone tips to adjust
to your needs and provide a comfortable fit
for hours.
Earphone multifunction button with LED
status indicators:
Multifunction button
Mode Function
Press and hold to go into pairing mode (if the
Pairing
earphones are not automatically in pairing mode)
Briefly press to answer and end an incoming call
Hands-free
Press it three times to redial the last number called
mode
Press and hold for about 1 second to reject or
ignore an incoming call
Briefly press the right or left button to play and
Playback
pause audio
mode
Press the button on the left earphone twice to
move backward in your playlist
Press the button on the right earphone twice to
move forward in your playlist
Voice Assistant for Siri and Google commands
Note: To enable this function a compatible mobile phone is required.
•When audio is being played or paused, press the Power/Multifunction
button for about 2 seconds to enable the Voice Assistant for Siri or
Google. Press this button again to turn it off.
LED indicators on earbuds
Status Function
Charging
Charging complete
Power on
Power Off
Pairing mode
active
Bluetooth
wireless pairing
Standby
Low battery
Incoming call/
Dialing
Phone is on
active call
The LED turns solid red
The LED turns solid blue
The LEDs light up in blue in both
earphones, then the left earphone LED
blinks red and blue. The right earphone
LED blinks blue every 5 seconds
The LED lights flash red, then turns off
The LED in the right earphone will turn
solid blue and the LED in the left one will
blink blue and red alternatively
®
When the device has paired, only the blue
LED will blink once every 5 seconds in both
earphones
The LED in the right earphone stays solid
blue and in the left earphone stays solid red
Red LED blinks every second
Blue LED lights up once every 5 seconds
Blue LED lights up once every 5 seconds
3. Basic operation
3.1. Charging the case and earphones
Note:
• The case and earphones have internal,
non-removable, rechargeable batteries. Do
not attempt to remove the battery as you may
damage the device.
• Although the case and earphones can be
charged at the same time, it is recommended
to fully charge the case battery before charging
the earphones for the first time.
1. To charge the case, plug the supplied USB
cable into a power source and the micro-USB
end in the case’s port. The case starts charging
automatically.
2. Charging the case battery to its full capacity
may take about 1.5 hours.
3. When the battery is fully charged, the LED
indicator lights will become solid white.
4. Proceed to unplug the case from the power
source and place the earphones on the
sockets of the charging case.
5. The case starts charging automatically, if not,
turn on the Multifunction button to start
charging the batteries of the earphones.
6. While the earphones are being charged, the
red indicator on each side lights up. When
fully charged, the LED will change to solid
blue. This process will normally take about 1.5
hours.
7. The fully charged buds have power for up to
7 hours of talking time or up to 120 hours of
standby time. However, these times may vary
depending on the mobile device used, on the
usage profile, and on the calling/ listening
habits of each individual user.
8. The low battery prompt or a tone will be
heard to let you know that the voltage is
below the acceptable level to continue
operating properly.
3.2. Turning your earphones on or o
1. To turn your earphones on, press and hold
the Multifunction button on each one for
about 4 seconds. The “Power on” prompt
will be heard, and the LED in one of the
earphones will light up in blue and the other
one will start blinking red and blue.
2. As both earphones synchronize, a prompt
will be heard indicating that the device is
connected. Once the device is paired the
blue LEDs on both earphones will blink every
4 seconds.
3. To turn the earphones o, press and hold
the Multifunction button on each one for
about 4 seconds. The “Power o” prompt
will be heard, and the red LED blink briefly
on both sides upon shutting o.
3.3. Wearing your earphones
• The earphones are intended to fit
comfortably for all day hands-free wearing.
• Select the tip that best fits the size of your
ear canal. Gently push the earphone into
your ear and accommodate the ear fin in
the outer ear. The earphone should rest
securely and comfortably in your ear when
properly inserted.
• Voice quality when speaking will be best
when there are no obstacles between the
mobile phone and earphones, including
your body.
4. Advanced operation
4.1. Pairing your earphones with a
mobile device
1. Turn both earphones on by pressing the
Multifunction button for about 4 seconds
on both sides simultaneously.
2. Set your Bluetooth
wireless earphone.
3. Place the phone and earphones within one
meter of each other.
4. The left and right earphones will pair
automatically. After both earphones have
synchronized with each other, the LED light
in one of them will blink slowly in blue and
the LED light in the other one will
alternatively blink red and blue to indicate
that it has entered into the pairing mode.
5. Select the KHS-705 earphone from the list of
newly discovered devices in your phone.
6. Accept by pressing Yes or OK on the
device. If prompted, enter the passkey 0000
(4 zeros). Your device will confirm when
pairing is complete.
7. The “Your device is connected” prompt will
be heard when the devices are able to
establish the wireless connection, and the
LED will change to blinking blue.
®
phone to “discover” the
8. If after 60 seconds the pairing process fails,
please repeat steps 1 through 6 as described
above.
9. The earphones will automatically go into
standby mode after a short period of
inactivity to save battery life.
10. You only need to pair the earphones with
your phone once, as they will re-pair
automatically.
11. The automatic re-pairing feature will allow
the earphones to be reconnected after being
switched back on or when placed again within
wireless range.
4.2. Call management using your
wireless earphones
• When there is an incoming call, your phone
will ring, the blue LED will blink once every 5
seconds, accompanied by a tone through your
earphones.
• Briefly press the Multifunction button on any
earphone to pick it up. You may also press the
answer button on your cellular phone to
receive the incoming communication in your
earphones.
Note: Audio will be out of both earphones.
• To end a call, simply press the Multifunction
button on any earphone once again.
• To ignore an incoming communication and
send the caller to voicemail, press and hold
the Multifunction button on any earphone
for about two seconds.
• “Last number redialed” will be heard when
you press the Multifunction button three
times on any earphone to dial the last
number called.
4.3. Music playback and voice command
using your wireless earphones
• Briefly press the Multifunction button on
any earphone to play and stop audio
playback.
5. Proper care
5.1. Troubleshooting
If you cannot connect the earphones to your
phone, do as follows:
• Ensure that the earphones are charged,
switched on, paired with and connected to
your phone.
• Ensure that the Bluetooth
on your phone.
• Check that the earphones are within 30 feet
of your phone and that there are no
obstructions between the earphones and the
®
feature is activated
phone, such as walls or other electronic
devices.
5.2. Precautions
• Your earphones are powered by a
rechargeable battery. The battery can be
charged and discharged hundreds of times,
but it will eventually wear out. Recharge
your battery only with compatible chargers
designated for this device.
• Unplug the USB charger from the source
when not in use.
• Parts of the earphones are magnetic. Metallic
materials may be attracted to the headset.
Do not place credit cards or other magnetic
storage media near the headset, because
information stored on them may be erased.
• Do NOT drop, hit or shake the device.
• Do NOT disassemble, repair or modify the
earphones yourself.
• Do NOT use harsh chemicals, cleaning
solvents, or strong detergents to clean the
device.
• Do NOT expose the earphones to excessive
heat or to direct sunlight for long periods of
time.
• Do NOT store the device in a place with
high humidity or dust.
Technical specifications
MPN KHS-705
Device
Type
Form Factor
®
Bluetooth
version and
chipset
Frequency response
Signal to noise ratio
Maximum power output
(RMS)
DC input
Buttons
Speaker
Driver unit
Maximum power output
(RMS)
Frequency
Impedance
Sensitivity
Microphone
Directivity
Signal to noise ratio
Output impedance
Sensitivity
Connectivity
Connection type
Wireless RF frequency
Wireless range
True Wireless Stereo earphones
with portable charging case
In-ear
JL Ver. 4.2
20Hz-20KHz
80dB
3mWx2
5V/300mA
Power/Multifunction (play/pause,
hands free function: answer/reject
call, redial, hang up)
10mm
3mW
20Hz-20KHz
16Ω
96±5dB
Omnidirectional
60dB
2.2K Ω
-42dB, ±3dB
®
Bluetooth
Ver. 4.2
2.4GHz-2.480GHz
33ft
Battery
Single headphone
battery
Charging case battery
Charging time (case and
earphones)
Run time (case and
earphones)
Charging time
(earphones)
Standby time
Charging method
Specifications
Product dimensions
(WxHxD)
Weight
Charging cable length
Warranty
* Enjoy up to 7 hours of continuous playback and up to 14 hours of
backup power from the charging case (estimated battery run time
depending on usage and volume settings).
50mAh lithium battery (051215)
per earphone
330mAh lithium battery (802025)
2 hours
Up to 21 hours*
1.5 hours
120 hours
5VDC/300mA
Charging case: 3.4x1.2x1.6in
1.6oz
1m
One year
FCC statement
This equipment has been tested and found to
comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation. This equipment
generates, uses, and can radiate radio frequency
energy and, if not installed and used in
accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by turning
the equipment o and on, the user is
encouraged to try to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the
equipment and receiver.
• Connect the equipment into an outlet on a
circuit dierent from that to which the
receiver is connected.
• Consult the dealer or an experienced
radio/TV technician for help.
Notes
Loading...