Klipsch XB-10 User Manual

Bookshelf Speaker

XB-10

• Patent-pending XT™ Tractrix® Horn technology

• Titanium compression driver creates precise high frequencies

Designed with crisp, dynamic listening in
mind, the XB-10 employs a premium tita­nium diaphragm compression driver and
high-output fiberglass cone woofer.

But what makes this flat-panel speaker
far superior is an all-new patent-pending
Tractrix® horn-loaded tweeter with XT™
technology. For over 60 years, horns have
been the driving force behind our stun­ningly precise sound, and this latest design
moves us farther ahead by allowing the
slender XB-10 to deliver an extremely
smooth response with constant directivity.

The XB-10’s beautifully crafted aluminum
extrusion enclosure features an eye-catch­ing black-grain anodized finish and high­gloss black accents. In fact, it’s a look that
brings a splash of sophistication to any
room.

For increased placement flexibility, the
XB-10 audio speaker can be paired with
the company’s optional XFS floor stand.

The entire ICON Series is performance
art at its best, capturing the spirit of our
past and pushing us into the future. It is a
brilliant representation of how our prod­ucts have evolved and remained desirable
over time. After just one listen, the ICON
sound will be imprinted in your conscious­ness forever.

• High-output woofer generates hard-hitting intensity

• Mounts to optional XFS floor stand for increased placement flexibility

S p e c i f i c a t i o n S

frequency response 96Hz-23kHz +/-3dB

low frequency extension 73Hz

power handling 50W continuous / 200W peak

recommended amplifier power 100W

sensitivity 92dB @ 2.83V / 1m

nominal impedance 8 ohms compatible

high frequency drivers 0.75” (1.9cm) Titanium diaphragm
compression driver mated to 80° x
80° round XT Tractrix® Horn

high freq crossover 2650Hz

low frequency drivers 4” (10.2cm) high-output, fiberglass
cone woofer

enclosure material Aluminum

enclosure type Bass-reflex via front-firing port

height 10.8” (27.3cm)

width 5.75” (14.6cm)

depth 6” (15.2cm)

mounting Wall mount bracket included
(Also fits optional XFS floor stand)

weight 6.5lbs (2.9kg)

finishes Black anodized w/ high-gloss
Black accents

built from 2007

www.klipsch.com

All specifications are subject to change without notice. ©2007

1-800-KLIPSCH