Page 1
WA-3
WIRELESS SUBWOOFER KIT
A COMPLETE SOLUTION
The WA-3 Wireless Subwoofer Kit comes with everything you need to wirelessly
send bass and/or low frequency effects information from your home theater
receiver/processor or stereo receiver* to a compatible Klipsch Group, Inc. (KGI)
subwoofer equipped with an internal wireless receiver.
Current KGI subwoofers with wireless receiver built-in include: Klipsch
C-380ASWi and C-310ASWi
NO MORE LONG, BULKY SUBWOOFER CABLES
The WA-3 Wireless Subwoofer Kit makes adding a subwoofer to a new or existing
speaker system much easier. It replaces the need for a long, thick, costly
subwoofer cable that traditionally must be connected between a receiver or
processor and a subwoofer.
IT ALLOWS FOR BEST SUBWOOFER PLACEMENT
Easily place the subwoofer where it both sounds and looks best in the room
since you’re not restricted by a speaker cable.
2.4 GHZ OPERATION WITH DYNAMIC CHANNEL SELECTION
The wireless signal transmits awlessly within a 50’ (15m) radius using
an advanced automatic channel selection technology. Even if you have a
wireless network or wireless phone system, the WA-3 Wireless Subwoofer
Kit does not interfere with, nor has interference from, any other wireless
systems in your home.
SPECIFICATIONS
FREQUENCY OF OPERATION 2.4GHz ISM band
CHANNEL SELECTION Automatic
SIGNAL RANGE 50’ (15m)
FREQUENCY RESPONSE 15 -150 Hz +0/-3 dB
VOLTAGE 100/240V 50/60Hz
CONNECT UP TO THREE SUBWOOFER
Up to three subwoofers can be used simultaneously when paired with a single
transmitter.
*Stereo receiver must have line level outputs for right and left channels to
attach to the WA-3 transmitter.
3502 WOODVIEW TRACE INDIANAPOLIS, IN 46268 | KLIPSCH.COM
All specications are subject to change without notice. ©2018 Klipsch Group, Inc. Klipsch and Tractrix are registered trademarks of Klipsch Group, Inc. A wholly-owned subsidiary of Voxx International Corporation.
OF 1
WA-3 SPEC SHEET | V01 | 080818
1
Loading...