Klipsch T5 User Manual

Klipsch T5 True Wireless Additional
Information

Klipsch T5 True Wireless earphones are incredibly versatile. We want to run through a few key
points on how to get the most out of your new earphones:

● Turning the earphones on and off is a snap.

● Just hold down the button where the Klipsch logo is located for three seconds.

● This option only works if you are not playing audio and or not on a phone call.

Turning Earphones On And Off

The earphones can also be powered on by removing them from the charging case and will be
powered off again when inserting them back into the case. After a few hours of your T5 True
Wireless resting in the case they will go into hibernation mode, this is to significantly prolong the
life of the battery while not in use. The caveat of hibernation mode is that the earphones will
take a few seconds longer to turn on when pulled out of the case.

Pairing To Your Device

Second, let’s talk pairing. Pairing your T5 True Wireless earphones is very easy. Press the
Klipsch logo button 3 times on the right earphone while the earphones are in the case. Also, the
earphones automatically enter pairing mode the first time they are taken out of the case.

You will see one of the earphones in your
pairing list (whichever one turned on first).
Once you’ve tapped it, within a few seconds
you should see a dialog prompting you to pair
to the second. Don’t worry - this is just so the
second earphone is paired to your device in the
instance you take that one out of the charging
case first.

If the dialog doesn’t pop up: take a look at which
one DID pair to your phone. If “R” paired and “L”
did not, place both earphones in the case and
take out “L”. You should now see it in your
pairing list and hear “Ready To Pair” from that
unit.

Re-Connecting Left to Right Earphone

If you see both “L” and “R” available to pair in the pairing list, this means the True Wireless link
between “L” and “R” is not established.

To re-establish their connection to each other, do the following:

1. Place both “L” and “R” into the case

2. Press “R” 5 times while in the case, it will begin to pulse red

3. Press “L” 5 times while in the case, it will begin to pulse red

4. Both “L” and “R” will glow purple to indicate they are linked to

each other

NOTE: Doing this also factory resets the T5 True Wireless, please
remove them from your device’s pairing history and re-pair them to
your device.

Once the earphones have been paired to a specific device, they will
automatically reconnect to the last device.

Charging Case Features

The charging case is incredibly handy. The case provides up to 24 additional hours of battery
life, in addition to the 8 hours you get on a single charge.

The charging case has several key features worth noting:

● The LED’s on the front of the case light up to show the battery life whenever an earpiece
is placed in the case or removed

● Second, the case lid is shaped to ensure the earpieces are in the right place to charge
when closed

● Thirdly, the case features a three-light fuel gauge to show you the level of charge on
your charging case

● Finally, the case is charged via USB-C, complete with a USB-C to USB-C charging cord.
This allows it to charge using any USB-C AC adapter or laptop which features this port.
Also included in the case is a USB-C (female) to USB-A (male) adapter to fully work with
any old USB-A AC adapter you may have at home.

Ear Tips

The patented, ultra-comfortable oval ear tips are unique to the T5 True Wireless earphones. To
detach, simply pull the tip straight off. If it feels like you’re pulling too hard, pull at a slight angle
to make it easier to detach. To re-attach, just line the eartips up to the nozzle and push until you
hear a click. Once seated properly, the eartip should be able to rotate 360 degrees.

Additional Notes

A short press on the left earphone (when using two) during a call will mute the microphones.
When using a single earphone, a short press on that earphone will mute the microphones also.
A double press will hang up the call.

Muting the headphones does not put the phone on mute, just the earpiece. You will hear a mute
tone every few seconds in this instance. There is no cause for alarm - it’s just a tone to let you
know your earpiece is muted.

If multiple Bluetooth devices with microphones are connected to your phone, a short press on
the right side during a phone call with no call waiting will cause a transfer to the last audio
gateway you used.

Happy listening!