Klipsch Synergy Subwoofer Owners manual

SUBWOOFER
IMPORTANT SAFETY INSTRUCTIONS
1. READ these instructions.
2. KEEP these instructions.
3.
HEED all warnings.
4. FOLLOW all instructions.
5. DO NOT use this apparatus near water.
7.
DO NOT block any ventilation openings. Install in accordance with the manufacturer's instructions.
8. DO NOT install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. DO NOT defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider than the other.A grounding type plug has two blades and a third grounding prong. The wider blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
PROTECT the power cord from being walked on or pinched, particularly at plugs, convenience
10. receptacles, and the point where it exits from the apparatus.
11.
ONLY USE attachments/accessories specified by the manufacturer.
12. USE only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13. UNPLUG this apparatus during lightning storms or when unused for long periods of time.
14. REFER all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit.
This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit.
WARNING: To reduce the risk of fire or electrical shock, do not expose this apparatus to rain or moisture. The product must not be exposed to dripping and splashing and no object filled with fluids – such as a vase of flowers – should be placed on the product.
Conventional Speaker Wire Connections – Using 16-gauge or larger speaker wire, connect the RED “positive” (+) terminal of your amplifier’s LEFT channel to the RED (+) terminal of your subwoofer’s LEFT channel input (“HIGH LEVEL IN”). Connect the BLACK “negative” (-) terminal of your amplifier’s LEFT channel to the BLACK “negative” (-) terminal of your subwoofer’s LEFT channel input (“HIGH LEVEL IN”). Repeat this procedure for connecting your amplifier’s RIGHT channel to your subwoofer’s RIGHT channel input (refer to Figure 4). Take care to make sure that no bare wires from any of the connections touch any other terminals as this could cause a short and damage your equipment.
“HIGH
LEVEL OUT” – This passes the “HIGH LEVEL IN” signal out to your left and right speakers
with frequencies below 100Hz removed.
“LINE IN/LFE” a general purpose input f surround electronics.
“LOW P cutof level are filtered out,
“GAIN” output level of the subwoofer to the main speakers.
“PHASE” 0/180 – This control is used to acoustically match the subwoofer’s output to your main speakers. Select the position, either 0˚ or 180˚, in which your subwoofer has more output at the listening position.
“POWER” ON/OFF– In the “ON” position, the subwoofer will remain “on” constantly or can turn “on” and “off” automatically when the “AUTO/ON” circuit is engaged (see “AUTO/ON”). In the “OFF” position, the subwoofer will remain “off” until the switch is manually turned back to the “ON” position.
AUTO/ON – When the main “POWER” ON/OFF switch is in the “OFF” position, this switch has no affect on the subwoofer. When the main “POWER ON/OFF” switch is in the “ON” position, this switch allows the auto circuit to be engaged. When this switch is in the “AUTO” position, the subwoofer will automatically turn “on” when it senses a signal. It will automatically turn “off” after 20 minutes with no signal. When this switch is in the “ON” position, the subwoofer will remain “on” as long as the “POWER” ON/OFF switch is in the “ON” position.
– This input is filtered by the built-in “LOW PASS” (LP) crossover and is designed as
or the subwoofer. It accepts the LFE signal output of your digital
ASS” (LP) CROSSOVER – The crossover allows the user to select the upper-frequency
f of the subwoofer
– This control serves as an overall volume control for the subwoofer. It is used to match the
. The frequency is selectable from 40-120Hz. Frequencies above the set
allowing you to blend the subwoofer’s output with that of your main speakers.
RISK OF ELECTRIC SHOCK
NOT OPEN
DO
WARNING: Voltages in this equipment are hazardous to life. There are no user-serviceable parts inside. Refer all servicing to qualified service personnel.
CAUTION: Changes or modifications not expressly approved by the manufacturer could void the users authority to operate this device.
POSITIONING
Klipsch powered subwoofers are designed to reproduce deep bass and deliver the impact tha makes your movies and music come alive. For optimum performance, place your subwoofer in a corner of the room on the same wall as your front channel speakers. (refer to Figures 1 and 2). Please note that room placement can have a dramatic effect upon the performance of your powered subwoofer. Corner placement, as suggested above, will increase the amount of bass output, while placing the subwoofer along the middle of a wall, or out in the room will decrease the amount of bass output. settings to find the one tha subwoofer’s location, keep in mind that you will need to connect the subwoofer’s built-in amplifier to an
CONNECTIONS AND CONTROLS
Optimal Connections – Klipsch Synergy Powered subwoofers can be connected to the subwoofer output of your electronics via the RCA jack inputs (“LINE IN”) on the subwoofer’s rear panel (refer to Figure 3). For more information on the controls mentioned in this manual and on bass management, see your dealer or visit www.klipsch.com.
YOUR SYNERGY SERIES SUBWOOFER
Experiment with a number of dif
t best suits your particular room and taste. When choosing your
AC power outlet.
This can be in place of the conventional speaker wire connections (“HIGH
ferent placement options and control
ENGLISH
t
LEVEL IN”).
tor– Klipsch Synergy powered subwoofers have an LED on the bottom of the front panel
LED indica that indicate the status of the built-in amplifier. The LED will light red when the amplifier is in
y mode and blue when the amplifier is on and receiving a signal.
standb
AND CLEANING OF
CARE
Your subwoofer has a durable vinyl finish that should only require dry dusting or cleaning with a dry cloth. Avoid the use of abrasive or solvent-based cleaners and harsh detergents. The brush attachment of your vacuum should remove any dust from your subwoofer enclosure.
YOUR POWERED SUBWOOFER
WARRANTY — U.S. AND CANADA ONLY
arranty below is valid only for sales to consumers in the United States or Canada.
W
The KLIPSCH, L.L.C. ("KLIPSCH") warrants this product to be free from defects in materials and workmanship (subject to the terms set forth below) for a period of five (5) years from the date of
Warranty period, KLIPSCH will repair or replace (at KLIPSCH’s option) this
During the
purchase. product or any defective parts (excluding electronics and amplifiers). For products that have electronics or amplifiers, the Warranty on those parts is for a period of two (2) years from the
te of purchase.
da
To obtain Warranty service, please contact the KLIPSCH authorized dealer from which you purchased this product.
Proof of purchase in the form of a bill of sale or receipted invoice, which is evidence that this product is within the Warranty period, must be presented or included to obtain Warranty service.
This Warranty is invalid if (a) the factory-applied serial number has been altered or removed from this product or (b) this product was not purchased from a KLIPSCH authorized dealer.You may call
Loading...
+ 2 hidden pages