Klipsch RW-5101-C User Manual
In-Ceiling Subwoofer
RW-5101-C
• Superb bass response, output and extension
• High sensitivity design
The RW-5101-C proves that domestic
harmony and powerful home theater
performance can co-exist. In other words,
just because you can’t see this in-ceiling
subwoofer, doesn’t mean you won’t feel it.
This hard-hitter generates clean, potent bass
that’ll lift you out of your seat. It also continues the Klipsch tradition of high output with
low distortion and effortless dynamic range.
The RW-5101-C utilizes a 10-inch longthrow woofer for unbeatable music and
movie playback and high power handling
(250 watts). The driver features a stiff,
well-damped Cerametallic cone, a specially
treated aluminum that has been electrochemically transformed into ceramic on
both outer surfaces. This ceramic compound allows the woofer to move at high
speeds without blurring the sound. Furthermore, the subwoofer features an MDF baffle
and sealed back enclosure, allowing it to
deliver consistent low-frequency response
regardless of the ceiling space.
Easy-to-install, the RW-5101-C can accommodate new or existing ceiling structures,
as the enclosure is designed to fit standard
ceiling joists. It employs all-new sure-grip
mounting dogs for even pressure against the
drywall. These robust dogs pull tight, leaving
no gaps in sight and providing long-term
installation reliability.
Timbre and style matched to all of our
other premium in-ceiling products, the
RW-5101-C brings a great bottom-end to
a wide variety of discreet stereo or home
theater systems. In fact, we’ve got premium
architectural solutions in all shapes, sizes and
prices, so take your pick!
• 10-inch Cerametallic woofer
• Sealed back enclosure
• Maximum installation reliability
• Mix and match with all our in-ceiling products
SpecificationS
Frequency Response 35-120Hz ± 4dB
Sensitivity 91dB @ 1watt/ 1 meter
Nominal Impedance 8 ohms
Amplifier Power See RSA-500 specifications
Woofer Single 10” (25.4cm) front firing,
Cerametallic™ cone, stamped steel
frame driver
Amplifier Use only with RSA-500 -EQ #3
Enclosure Material MDF baffle, ABS shell
Enclosure Type Sealed Enclosure
Height 15.3” (38.7 cm) Max Flange Diameter
Width N/A
Depth 9.5” (24.1 cm)
Cutout Dimensions 13.3” (33.7 cm) Diameter
Weight 13 lbs. (6 kg)
Finishes White
Built From 2008
*The RW-5101-C must be used in conjunction with the company’s RSA-500 subwoofer amplifier, sold separately. Two of these
subwoofers can be connected to a single amplifier.
www.klipsch.com
1-800-KLIPSCH
All specifications are subject to change without notice. ©2008
Loading...