![](/html/a3/a3da/a3da68ca7888d4b0c33f6ee404a48f90f58bbb6633ae7db02229a0939bbc00f9/bg1.png)
10'' Powered Subwoofer
Based on Klipsch’s innovative Corner Port™
technology, the RW-10 powered subwoofer
delivers strong, clean bass from a remarkably
compact enclosure. And because both the
driver and the port are at the front of the
cabinet, the RW
a wall, deep into a corner, or even in custom
cabinetry. The result is a high-value,
installation-friendly design that brings added
depth, realism and emotional impact to any
music or home theater system. It can be used
in a supporting role to full-range speakers,
filling in and reinforcing their bottom end, or
as the sole bass provider for a system built
around small satellite speakers, such as the
Klipsch Reference Satellites.
The RW-10 has a 10-inch Cerametallic™
cone driver with a large magnet structure and
large, high-temperature voice coil, enabling it
to deliver rich, pulse-pounding bass to below
25Hz. It is powered by a high-efficiency
SH®digital hybrid amplifier
BA
watts dynamic power output.
The RW-10’s low-pass crossover has a steep
24dB/octave slope and is outfitted with
continuously variable frequency and phase
controls, facilitating smooth integration with
the main speakers. Input is via line-level RCA
jacks or speaker
Alternatively, a single direct-input RCA jack
allows connection straight through to the
subwoofer amplifier
crossover built into an A/V preamp or receiver.
The RW-10’s level control is mounted on the
side of the cabinet for easy access, and an
“auto power
to turn on and off automatically. The cabinet
comes with a durable, attractive Black Ash
woodgrain vinyl finish.
-10 can be placed back against
, capable of 575
-level binding posts.
, for use with the
” feature enables the subwoofer
RW-10
■
Front-mounted Cerametallic cone driver with front-firing Corner Port
■
High-power, high-efficiency BASH digital hybrid amplifier
■
Steep-slope 24dB/octave crossover filter with bypass option
■
Side-mounted level control for easy adjustment
■
Auto Power feature turns sub on and off automatically
SPECIFICATIONS
ENCLOSURE TYPE Bass-reflex via front-firing Corner Port
AMPLIFIER BASH digital hybrid
FTC Rated Power: 260 watts continuous @ <2%THD
Dynamic Power*: 575 watts
AUTO POWER 2 second ON delay, 15 minute OFF delay
BANDWIDTH 25-120Hz ± 3dB
MAXIMUM OUTPUT 110dB @ 30Hz 1/8 space, 1 meter
LOW PASS Continuously variable from 40-120Hz
CROSSOVER 24dB/octave slope above 120Hz
INPUTS Two high level speaker binding posts, two line
level RCA phono jacks, one line level LFE jack
OUTPUTS None
PHASE Continuously variable from 0-180 degrees
DRIVE COMPONENTS One 10'' (25.4cm) front-firing Cerametallic
cone woofer
NET WEIGHT 39 lbs. (17.7kg)
HEIGHT 17.6" (44.7cm)
WID
TH 12.5" (31.8cm)
DEPTH
FINISH
V
OLTAGE 110/120 VAC 60Hz
EXPOR
T VERSION 230 VAC 50/60Hz
Dynamic po
*
woofer under normal operating conditions. While the FTC power rating
indicates power available on a continuous, long-term basis, subwoofers do
no
deliver large, short-term peaks of power to be able to support the wide
dynamics required by today’s digital music and movie formats. In addition
o t
t
rating as a better indication of the product’s true performance.
w
t rely on that type of power. Instead, the amplifier is called upon to
er rating, we’ve provided the dynamic power
w
C po
ed FT
uir
eq
he r
he actual po
es t
er indicat
wer this amplifier will deliver to the
19" (48.3cm)
Black Ash woodgrain vinyl
All specifications are subject to change without notice. ©2004
www.klipsch.com
1-800-KLIPSCH