Dual 4" Two-Way Loudspeaker
RVX-42
With similar flatness and styling to popular
plasma and LCD televisions, the Klipsch
Reference Series RVX-42 is a highperformance audio solution that complements
this growing consumer electronics segment.
This on-wall model has a single-piece
aluminum extrusion enclosure. It employs dual
4-inch aluminum woofers and uses a 1-inch
titanium-dome compression driver mated to a
round Tractrix
efficiency.
Because the RVX-42 is 24-inches high, it
looks great with 42-inch and larger plasma and
LCD screens. It also features a J-box size,
dual keyhole mount, plus OmniMount
provisions and a pedestal base. There are
two insert locations on the RVX-42 where the
pedestal can be positioned – one in the center
and one on the bottom so the loudspeaker can
serve as a center channel or bookshelf.
vailable in the same black or silver finish as
A
the Klipsch Reference Satellites, the RVX-42
can be combined with these compact speakers
to create complete systems. For example,
consumers can create a 5.1-channel surround
sound system using a pair of RVX-54s, a pair of
Reference Satellite RSX-4s for surrounds, a
RVX-42 for a center channel and a Reference
Series RW-12 subwoofer.
The RVX
for mix-and-match simplicity.
®
Horn for maximum clarity and
-42 is packaged and sold individually
SPECIFICATIONS
BANDWIDTH 92Hz-20kHz ± 3dB
SENSITIVITY 94dB @ 2.83 volts/1 meter
NOMINAL IMPEDANCE 8 ohms compatible
CROSSOVER FREQUENCY 2175Hz
POWER HANDLING 75 watts (300 watts peak)
ENCLOSURE TYPE Bass-reflex via dual side-firing ports
DRIVE COMPONENTS Two way system using one 1'' (2.5cm)
magnetically shielded, titanium dome
compression driver tweeter with an integral
®
WEIGHT 14 lbs. (6.4kg) including base
HEIGHT 26.3" (66.7cm) including base— vertical
WIDTH 7.4" (18.8cm) including base— vertical
DEPTH
FINISH Black or Silver
MOUNTIN
G Keyhole mounts for vertical or horizontal
round 90˚ MicroTractrix Horn and two 4''
(10.2cm) magnetically shielded, Cerametallic
cone woofers
24" (61cm) speaker only— vertical
8.3" (21cm) including base— horizontal
4.6cm) speak
5.8" (1
5.8" (14.6cm) speaker only— vertical
24" (61cm) with or without base— horizontal
7.4" (18.8cm) including base—
vertical or horizontal
4.5" (11.4cm) speaker only—
verticalor horizontal
placement and two 3/8”–16 threaded inserts
tical or horizontal placement
er
or v
f
er only— horizontal
.klipsch.com
www
1-800-KLIPSCH
All specifications are subject to change without notice. ©2004