Klipsch RSW-10 Brochure

Dual 10'' Powered Subwoofer

RSW-10

Compact and powerful, the RSW-10 powered
subwoofer extends and intensifies the bass
output of any music or home theater system.
Its built-in electronic crossover provides all the
flexibility necessary to achieve a seamless
blend with the main speakers, whether small
satellites that depend on the subwoofer to
shoulder the entire low-frequency load or full­range models that need only bottom-end
reinforcement.

The RSW-10 has a rear-firing active driver with
a rigid, low resonance cast aluminum frame
and a front-mounted passive radiator, both
with 10-inch Cerametallic™ cones. The active
driver’s large magnet structure and high­temperature voice coil enable it to deliver rich,
clean, pulse-pounding bass to below 30Hz. It
is powered by a high-efficiency BASH®digital
hybrid amplifier, capable of 1150 watts
dynamic output. The passive radiator enables
the RSW-10 to generate very deep bass from
a relatively small enclosure.

The RSW
exceptionally steep 36dB/octave slope, a
continuously variable frequency control, and
a phase switch, facilitating smooth
speaker/subwoofer integration. A bypass
switch allows direct connection to the
subwoofer amplifier for use with the crossover
built into an A/V preamp or receiver
RSW
side of the cabinet for easy access. Input is line­level via a stereo pair of RCA jacks; another
pair of RCA jacks provides unfiltered output
for connection to a second subwoofer or
other component. An “auto power” feature
enables the subwoofers to turn on and off
automatically.

-10’s low-pass crossover has an

. The

-10’s level control is mounted on the

■

Cerametallic cone driver and passive radiator, cast-aluminum frames

■

High-efficiency BASH digital hybrid amplifier

■

Steep-slope 36dB/octave crossover filter with bypass option

■

Side-mounted level control for easy adjustment

■

Auto power feature turns sub on and off automatically

SPECIFICATIONS

ENCLOSURE TYPE 10'' Bass-reflex via 10'' passive radiator
AMPLIFIER BASH digital hybrid

FTC Rated Power: 385 watts continuous @ <1%THD
Dynamic Power*: 1150 watts @ <1%THD

AUTO POWER 2 second ON delay, 15 minute OFF delay

BANDWIDTH 29-120Hz ± 3dB

MAXIMUM OUTPUT 109dB @ 30Hz 1/8 space, 1 meter

LOW PASS Continuously variable from 40-120Hz

CROSSOVER 36dB/octave slope above 120Hz
INPUTS Two line level RCA phono jacks, low pass

enable/disable switch for LFE mode

OUTPUTS Two line level RCA phono jacks (unfiltered)

PHASE Switchable 0-180 degrees
DRIVE COMPONENTS One 10'' (25.4cm) Cerametallic cone woofer

and one 1

passive radiator

NET WEIGHT 45 lbs. (20.4kg)

HEIGHT 14.2" (36.1cm)

WIDTH 13.6" (34.5cm)
DEPTH 19.5" (49.5cm) w/grille, 18''(45.7cm)

w/o g

FINISH

TAGE 110/120 VAC 60Hz

OL

V

T VERSION

EXPOR

*

Dynamic power indicates the actual power this amplifier will deliver to the woofer under normal operating
conditions. While the FTC power rating indicates power available on a continuous, long-term basis, subwoofers
do not rely on that type of power. Instead, the amplifier is called upon to deliver large, short-term peaks of

o be able t

er t

w

po
addition to the required FTC power rating, we’ve provided the dynamic power rating as a better indication of

he product’s true performance.

t

o suppor

he wide dynamics r

t t

Blac

N/A

equired by today’s digital music and movie formats. In

0'' (25.4cm) Cer

ille

r

k Ash woodgrain vinyl

ametallic cone

All specifications are subject to change without notice. ©2004

.klipsch.com

www

1-800-KLIPSCH