Klipsch RSA-5000 Brochure
500-Watt Multiple Use Subwoofer Amplifier
RSA-500
While the RSA-500 subwoofer amplifier was
primarily designed for use with the RW-5802 inwall subwoofer, it also features custom settings
for the AW-800-SW outdoor subwoofer.
This high-powered device will drive up to two
of any of these subwoofer modules and delivers
300 watts into an 8-ohm load (one subwoofer
module) and 500 watts into a 4-ohm load (two
subwoofer modules). It also comes with rack
ears for fast and secure placement into any
standard 19-inch rack.
To keep end users from inadvertently tampering
with performance levels, the majority of the
RSA-500's controls are housed on its rear panel.
The fuse is also included on the back for quick
and easy replacement. A detachable IEC power
cord allows for the simple removal and
reinstallation of the entire amplifier unit. The
RSA-500 was also designed to “play nice” by
offering standard input/output connectivity that
will support any type of system.
■
EQ switch for use with different subwoofers
■
Selectable signal-sensing or voltage triggered auto-on/off circuit
■
300 watts continuous into 8 ohms or 500 watts continuous into 4 ohms
■
Line and speaker level inputs
■
Rack ears included
SPECIFICATIONS
FREQUENCY RESPONSE 20Hz-1kHz ± 3dB
ENCLOSURE TYPE Use only with RW-5802,
and AW-800-SW subwoofer enclosures
(either one or two)
AMPLIFIER BASH Hybrid
AMPLIFIER POWER FTC Rated Power: 300W into 8 ohms,
500W into 4 ohms, 20Hz-1kHz @ <1.5% THD
Dynamic Power: 875W into 8 ohms,
AUTO POWER ON 2 second ON delay, 15 minute OFF delay
LOW PASS CROSSOVER Continuously variable from 40-120Hz,
INPUTS 2 Gold-plated speaker binding posts,
2 Gold-plated RCA phono jacks plus
single LFE
OUTPUTS 2 Gold-plated unfiltered RCA phono jacks
plus single LFE
PHASE Switchable between 0 and 180 degrees
DIMENSIONS 3.5" (8.9cm) H x 17" (43.2cm) W x
12.6" (32cm) D (without rack ears)
WEIGHT 18 lbs. (8.2kg)
FINISH Black anodized aluminum face plate
VOLTAGE 110/120 VAC 60Hz
FEATURES Selectable EQ, Speaker Level In,
Low voltage trigger, rack ears included
Dynamic power indicates the actual power this amplifier will deliver to the woofer under normal operating
conditions. While the FTC power rating indicates power available on a continuous, long-term basis, subwoofers
do not rely on that type of power. Instead, the amplifier is called upon to deliver large, short-term peaks of
power to be able to support the wide dynamics required by today’s digital music and movie formats. In addition
to the required FTC power rating, we’ve provided the dynamic power rating as a better indication of the
product’s true performance.
www.klipsch.com
1-800-KLIPSCH
All specifications are subject to change without notice. ©2006
Loading...