Klipsch RF-35 Brochure

Dual 8'' Two-Way Floorstanding Loudspeaker

Extended low-frequency response,
extraordinary efficiency, and very high output
capability make the RF-35 a true performance
and value leader. Requiring less than a quarter
the amplifier power of conventional speakers,
it conveys the full emotional impact of
whatever signal it is fed, without strain or
limitation. Whether standing alone in a stereo
music system or fronting a sophisticated home
theater, the RF-35 brings the experience home
with maximum intensity. And because it is
perfectly matched cosmetically and sonically to
other Klipsch Reference Series loudspeakers,
it allows flexibility in system configuration.

The RF-35 uses a 1-inch titanium dome
compression driver tweeter for the high
frequencies, loaded by a 6-inch square 90° x
60° Tractrix®Horn molded into the front of
the enclosure. The horn raises the driver’s
efficiency and controls its radiation pattern to
minimize detail-blurring reflections from walls,
floor, and ceiling. Dual Cerametallic™ cone
woofers with rigid, low
polymer frames generate powerful, dynamic
bass. All drivers are magnetically shielded to
prevent interference with direct-view
television sets.

Amplifier connections are via two pairs of
binding posts, which are strapped together for
normal wiring. Removing the straps allows the
speaker to be bi-wired. Magnetic posts hold

-35’s low

the RF
place, and the outrigger feet can be fitted with
adjustable-height rubber pads or spikes. The
rear-ported cabinet is available in a Black Ash
or Light Cherry woodgrain vinyl finish.

-diffraction grille securely in

-resonance cast-

RF-35

■

Extremely high sensitivity and power-handling

■

Tractrix Horn titanium dome compression driver tweeter for clean,

detailed highs

■

Cerametallic cone woofers with cast-polymer frames

■

Bi-wire compatible inputs

■

Magnetically shielded to prevent video interference

SPECIFICATIONS

BANDWIDTH 37Hz-20kHz ± 3dB

SENSITIVITY 98dB @ 2.83 volts/1 meter

NOMINAL IMPEDANCE 8 ohms compatible

CROSSOVER FREQUENCY 2600Hz

POWER HANDLING 125 watts (500 watts peak)

ENCLOSURE TYPE Bass-reflex via rear-firing port
DRIVE COMPONENTS Two way system using one 1'' (2.5cm)

magnetically shielded, titanium dome
compression driver with an integral 6''
(15.2cm) square 90˚x 60˚ Tractrix Horn and
two 8'' (20.3cm) magnetically shielded,
Cerametallic cone woofers

g)

WEIGHT

HEIGHT

TH

WID

DEPTH

FINISH

4 lbs. (2

5

40.9" (1

9.3" (23.6cm)

4.8" (3

1

Blac

4.5k

03.9cm) w/f

.6cm)

7

k Ash or Light Cher

ee

t, 40'' w/o f

oodgrain Vinyl

y W

r

ee

t

.klipsch.com

www

1-800-KLIPSCH

All specifications are subject to change without notice. ©2004