Klipsch RF-25 Brochure

Dual 6.5'' Two-Way Floorstanding Loudspeaker
Dual 6.5-inch woofers and Klipsch Tractrix™ Horn technology give the RF-25 bass authority and dynamic impact that defy its size. So efficient that it requires only a quarter the amplifier power of conventional speakers, the RF-25 represents an extraordinary combination of performance and value. It works equally well standing alone in a stereo music system or anchoring a sophisticated home theater. And because it is perfectly matched cosmetically and sonically to other Klipsch Reference Series loudspeakers, it allows terrific flexibility in system configuration.
The RF-25 uses a 1-inch titanium dome compression driver tweeter for the high frequencies, loaded by a 6-inch square 90° x
®
60° Tractrix the enclosure. The horn raises the driver’s efficiency and controls its radiation pattern to minimize detail-blurring reflections from walls, floor
, and ceiling. Rigid, low Cerametallic™ cones and cast-polymer frames enable the twin woofers to generate rich, clean, room-filling bass. All drivers are magnetically shielded to prevent interference with direct-view television sets.
Amplifier connections are via two pairs of binding posts, which are strapped together for normal wiring. R speaker to be bi-wired. Magnetic posts hold the RF-25’s low-diffraction grille securely in place and the outrigger feet can be fitted with adjustable-height rubber pads or spikes. The rear-ported cabinet is available in a Black Ash or Light Cherry woodgrain vinyl finish.
Horn molded into the front of
-resonance
emoving the straps allows the
RF-25
Extremely high sensitivity and power handling
Tractrix Horn titanium dome compression driver tweeter for clean,
detailed highs
Cerametallic cone woofers with cast-polymer frames
Bi-wire compatible inputs
Magnetically shielded to prevent video interference
SPECIFICATIONS
BANDWIDTH 45Hz-20kHz ± 3dB
SENSITIVITY 97dB @ 2.83 volts/1 meter
NOMINAL IMPEDANCE 8 ohms compatible
CROSSOVER FREQUENCY 2633Hz
POWER HANDLING 125 watts (500 watts peak)
ENCLOSURE TYPE Bass-reflex via rear-firing port DRIVE C
WEIGHT 44 lbs. (20kg)
HEIGHT 38.9" (98.8cm) w/feet, 38'' w/o feet
WIDTH 8.5" (21.6cm)
DEPTH
FINISH
OMPONENTS Two way system using one 1'' (2.5cm)
magnetically shielded, titanium dome compression driver with an integral 6'' (15.2cm) square 90˚x60˚ Tractrix Horn and two 6.5'' (16.5cm) magnetically shielded, Cerametallic cone woofers
13.8'' (35cm)
Black Ash or Light Cherry woodgrain vinyl
.klipsch.com
www
1-800-KLIPSCH
All specifications are subject to change without notice. ©2004
Loading...