Klipsch RF-15 Brochure

Dual 5.25'' Two-Way Floorstanding Loudspeaker

The RF versatility in a high-performance floorstanding loudspeaker. Slender and compact, it still has the efficiency, power handling, and bass extension to deliver a potent sonic wallop. The RF-15 works equally well standing alone in a stereo music system or fronting a sophisticated home theater. And because it is perfectly matched cosmetically and sonically to the other Klipsch Reference Series loudspeakers, it allows terrific flexibility in system configuration.

-15 offers tremendous value and

RF-15

■

ery high sensitivity and power handling

■

Tractrix Horn titanium dome compression driver tweeter for clean,

detailed highs

■

Cerametallic cone woofers with cast-polymer frames

■

Bi-wire compatible inputs

■

Magnetically shielded to prevent video interference

SPECIFICATIONS

BANDWIDTH 46Hz-20kHz ± 3dB

SENSITIVITY 96dB @ 2.83 volts/1 meter

The RF-15 uses a 1-inch titanium-dome compression driver tweeter for the high frequencies, loaded by a 5-inch square 90° x

60° Tractrix the enclosure. The horn raises the driver’s efficiency and controls its radiation pattern to minimize detail-blurring reflections from walls, floor, and ceiling. Dual 5.25-inch Cerametallic™cone woofers with rigid, low resonance cast-polymer frames generate dynamic, room-filling bass. All drivers are magnetically shielded to prevent interference with direct-view television sets.

Amplifier connections are via two pairs of binding posts, which are strapped together for normal wiring. Removing the straps allows the speaker to be bi-wired. Magnetic posts hold the RF-15’s low-diffraction grille securely in place, and the outrigger feet can be fitted with adjustable-height rubber pads or spikes. The rear-ported cabinet is available in a Black Ash or Light Cherry woodgrain vinyl finish.

Horn molded into the front of

NOMINAL IMPEDANCE 8 ohms compatible

CROSSOVER FREQUENCY 2350Hz

POWER HANDLING 100 watts (400 watts peak)

ENCLOSURE TYPE Bass-reflex via rear-firing port DRIVE C

WEIGHT 37 lbs. (16.8kg)

HEIGHT 36.9" (93.7cm) w/feet, 36'' w/o feet

WIDTH 6.8" (17.3cm)

DEPTH 12.8'' (32.5cm)

FINISH Black Ash or Light Cherry woodgrain vinyl

OMPONENT

Two way system using one 1'' (2.5cm) magnetically shielded, titanium dome

ession driver with an integral 5''

com (12.7cm) square 90˚x 60˚ Tractrix Horn and

y shielded,

o 5.25'' (1

tw Cerametallic cone woofers

3.3cm) magne

ticall

.klipsch.com

www

1-800-KLIPSCH